Bedienungsanleitung Katadyn PowerSurvivor 40E (Seite 4 von 35) (Englisch)

522382

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

System Description

The Katadyn PowerSurvivor 40E watermaker system has several components. Refer to the

System Diagram

(Figure A-1) in the Appendix for an overview of the components of the

system and their interconnections.

Motor/Drive/Pump/Membrane Assembly: At the heart of the watermaker system

is a high-pressure, positive-displacement pump. The pump is powered by a reliable 12 (or 24)

VDC electric motor. An oil-bath gearbox (drive assembly) converts the rotary motion of the

electric motor to a powerful, reciprocating, linear motion for driving the pump piston. The pump

pressurizes input seawater to approximately 800 psi (pounds per square inch). The high

pressure forces product freshwater through a semipermeable membrane located in the

membrane housing. All of these main components have been integrated into a single, compact

piece of equipment—with low power consumption, quiet operation and a small footprint.

Prefilter Assembly: The prefilter assembly consists of one prefilter housing and a

standard 30-micron prefilter element constructed of polyester fibers. Two standard elements are

included with each system. In some exceptional circumstances, an optional second prefilter

assembly with a 5-micron prefilter element may be needed (see Kits & Accessories). The

prefilter assembly is separate from the pump, which allows it to be installed in a convenient and

accessible location.

Valves: Two high-quality plastic 3-way valves are supplied. The prefilter 3-way valve selects

between two input sources for the prefilter assembly (and pump):

• Clean seawater during normal operation

• An alternate intake line for inputting membrane preservative or a cleaning

solution

The product 3-way valve allows easy selection between the two required destinations for the

product freshwater:

• A freshwater collection tank for normal operation

• A convenient drain location for testing and discarding product freshwater,

membrane preservative and cleaners

Note: If you collect and discard the product freshwater at the same location, manually

directing the output from the product freshwater hose may be the most practical approach. In

this case, the product 3-way valve need not be installed.

Hoses and Hardware: Each PowerSurvivor 40E watermaker is shipped with hardware

sufficient to perform a normal installation. The 3/8" I.D. reinforced plastic hose is used for

seawater intake and reject brine. The smaller, 3/16" I.D. clear plastic hose is for routing product

freshwater. There are also hose clamps and mounting bracket hardware for the prefilter

assembly.

Customer-supplied Equipment: Every installation represents a unique challenge.

You or your installer will have to provide:

• a reliable source of clean seawater for input to the prefilter 3-way valve

• plumbing to an appropriate drain location for the reject brine water

• a plumbing solution for your freshwater collection tank.

Our Promise: Every Katadyn PowerSurvivor 40E watermaker includes a three-year factory

warranty and a long history of outstanding customer support. Our reputation for providing a

quality product along with service when and where you need it is unequaled in the industry. Of

course, you may never need us but, if you do, we’ll be there.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Katadyn PowerSurvivor 40E Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Katadyn PowerSurvivor 40E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info