935.1841/C/0805/4.4e/SKS Subject to technical changes!
KATHREIN-Werke KG · Anton-Kathrein-Straße 1–3 · Postfach 10 04 44 · D-83004 Rosenheim · Deutschland · Telefon (0 80 31) 18 40 · Telefax (0 80 31) 18 43 06
Mounting location
The IF distribution components must only be installed in
dry indoor locations. Do not install on or near to easily
inflammable material.
To guarantee good heat dissipation, the air must be able
to circulate. The components must be grounded (Cu wire
min. diam. 4 mm
2
)
Mounting position: preferably wall mounted.
Mounting accessories: Wood screws, max. 4 mm Ø
Connections: Screw-on connector 75 Ω,
Type F acc. to EN 60169-24.
Admis. diameter of the centre
conductor: 0,6 – 1,2 mm,
free from burr.
Attention: A centre conductor
bigger than 1.2 mm
or burr can damage
the connectors of the
component.
Mounting
– The component carries current!
– Do not open nor manipulate the component.
– Pull the mains plug when working on the system.
– Install with enough distance to other components and
observe the mounting position (see illustr.)
Montagelage
Antenna socket
Electronic equipment is not household waste – in accordance with directive 2002/96/EC OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL of 27th January 2003 on used electrical and electronic equipment, it must be
disposed of properly.
At the end of its service life, take this unit for disposal at a relevant official collection point
