Bedienungsanleitung Keiser M3i - Indoor Group Cycle (Seite 22 von 24) (Englisch)

738043

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

M3i INDOOR GROUP CYCLE 22

Every Workout

• Bike is properly stabilized, level to the oor (refer to “Base Stabilizer” section, page 14).

• Check that parts most susceptible to wear are not damaged or broken (Adjustment

Knobs, L-Handles, Pedal Cages, Pedal Straps, and Seat Upholstery).

• Cleaning: Target areas in the sweat path with a dry soft towel or cloth.

Monthly

• Clean the external body/parts thoroughly, targeting areas that come in contact with

sweat, using a damp soft towel and a mild detergent (neutral, non-caustic). Wipe dry

the equipment.

Quarterly

• Apply wax to protect the paint nish on metal parts:

1. Wipe down and thoroughly clean the bike prior to applying wax.

2. Use an easily applied automotive treatment such as Meguiar’s® Quik Detailer Mist

and Wipe.

3. Target areas that come in contact with sweat as they are most vulnerable to rust.

NOTE: Failure to apply a coat of wax to high-sweat areas at a minimum of four times a

year will decrease paint and frame life due to corrosion and will void the warranty.

Annually

• Check to ensure all external visible screws and nuts are not loose and that they are

tightened.

• Check parts most susceptible to wear and replace if damaged or broken (Adjustment

Knobs, L-Handles, Pedal Cages, Pedal Straps, and Seat Upholstery).

• The low battery signal (“LO-BA”) will appear on the computer display when it is time to

replace the batteries (two AA batteries, refer to “Computer Battery Replacement” on

page 23 for complete instructions).

NOTE: For establishments with multiple bikes, replacement of all computer batteries at

the same time is recommended.

• Apply LPS 3® Rust Inhibitor or WD-40® Long-Term Corrosion Inhibitor to the Left Bottom

Bracket Bearing and to the clip-in portion of each Pedal.

• Apply lubricant to the Adjustment Knobs:

1. Unscrew and remove the Adjustment Knobs.

2. Clean threads with a lint-free cloth.

3. Apply a moderate amount of lubricant to threads, then replace the Adjustment Knobs.

NOTE: Both the threaded stud and the threaded insert nut are stainless steel. It is critical to

keep the threads lubricated with a heavy grease (preferably white or clear in color), such

as HYDROTEX® Acculube #2 or any compound with equivalent anti-wear and corrosion

resistant properties.

Weekly

for the

1st Month

• Check to ensure that the bike is in safe proper working order (perform the full “Proper

Operation Check,” page 14).

• Check that parts most susceptible to wear are not damaged or broken (Adjustment

Knobs, L-Handles, Pedal Cages, Pedal Straps, and Seat Upholstery).

CAUTION: Routine maintenance is an essential part of maintaining the highest level of equipment safety, as

well as optimal equipment performance. Immediately replace damaged, worn, or broken parts and do not use

the bike until all repairs have been completed and tested by a certied Keiser technician.

MAINTENANCE

PREVENTATIVE MAINTENANCE SCHEDULE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Keiser M3i - Indoor Group Cycle Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info