Bedienungsanleitung Kemppi A7 MIG gun - 500g (Seite 4 von 19) (Englisch)

686364

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

A7 MIG Gun 500-g© Kemppi Oy 2017 1712

OPERATING MANUAL

3. IDENTIFICATION

The welding gun system Kemppi A7 MIG Gun 500-g is used

in industry and in the trade for welding using inert gases

(MIG) or active gases (MAG). This model is gas-cooled

and can be used in all welding positions. These operating

instructions describe only the welding gun system A7 MIG

Gun 500-g. The welding gun system may only be operated

as supplied or with authentic Kemppi spare parts.

Figure 1: Kemppi A7 MIG Gun 500-g

4. CE MARKING

This device fulls the requirements of the following EU

directives:

• The Machinery Directive, 2006/42/EC

• The EMC Directive, 2004/108/EC

• The RoHS Directive, 2011/65/EU

5. SAFETY

Read and follow the additional safety instructions

enclosed.

5.1 Designated use

The gas-cooled welding gun system A7 MIG Gun 500-

g must be used for robot and automatic application as

described in this manual. Designated use also includes

complying with the prescribed operation, maintenance,

and servicing conditions.

Any use other than that described under “Designated use”

is considered contrary to the intended use.

Unauthorized conversions or power-increasing modi-

cations are not allowed.

The warranty does not cover wear parts and damage due

to overloading or improper use.

5.2 Responsibilities of the user

• Keep the operating instructions within easy reach

in the location of the device for reference, and

include the operating instructions when handing

over the product.

• Installation, operation, and maintenance work

may only be carried out by qualied personnel.

Qualied personnel are persons who, on account

of their special training, knowledge, experience,

and familiarity with the relevant standards, are

able to assess the tasks assigned to them and

identify possible dangers.

• Keep all other persons out of the work area.

• Follow the accident prevention regulations of the

relevant country.

• Ensure good lighting of the work area, and keep

the area clean.

• Observe the following standards and guidelines

in particular:

• 89/391/EEC: Directive on the introduction

of measures to encourage improvements in

the safety and health of workers at work

• 2009/104/EC: Directive concerning the

minimum safety and health requirements

for the use of work equipment by workers

at work

• 2004/108/EC: Directive on the

harmonization of the laws of the Member

States relating to electromagnetic

compatibility The occupational health and

safety regulations of the country in question

• Regulations on occupational safety and

accident prevention

5.3 Personal protective equipment

To avoid danger to the user, using personal protective

equipment (PPE) is recommended in these instructions.

PPE consists of the following:

• Protective clothing

• Safety goggles

• A class-P3 respiratory mask

• Gloves

• Safety shoes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kemppi A7 MIG gun - 500g Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info