686368
61
Zoom out
Zoom in
Vorherige Seite
1/67
Nächste Seite
61
A7 MIG Welder© Kemppi Oy 2018 1824
OPERATING MANUAL
5.2.6 I/O device errors
Code Description Severity Measures
201 INPUT 1 ERROR
Input 1 reported an error.
Error In addition to an ordinary input signal function, each input of
the I/O device can be congured to report an error or a warning
when the input status changes. The warning is just a notication
from an event - it does not prevent the operation of the welding
system. After clearing its cause, the warning state can be cleared.
The error stops welding and prevents operation of the welding
system until the situation is cleared and the error state is reset.
Both warnings and errors are recorded into the logbook.
See the A7 MIG Welder Integration guide for more information on
the input conguration.
202 INPUT 2 ERROR
Input 2 reported an error.
Error
203 INPUT 3 ERROR
Input 3 reported an error.
Error
204 INPUT 4 ERROR
Input 4 reported an error.
Error
205 INPUT 5 ERROR
Input 5 reported an error.
Error
206 INPUT 6 ERROR
Input 6 reported an error.
Error
207 INPUT 7 ERROR
Input 7 reported an error.
Error
208 INPUT 8 ERROR
Input 8 reported an error.
Error
209 INPUT 1 WARNING
Input 1 reported a warning.
Warning
210 INPUT 2 WARNING
Input 2 reported a warning.
Warning
211 INPUT 3 WARNING
Input 3 reported a warning.
Warning
212 INPUT 4 WARNING
Input 4 reported a warning.
Warning
213 INPUT 5 WARNING
Input 5 reported a warning.
Warning
214 INPUT 6 WARNING
Input 6 reported a warning.
Warning
215 INPUT 7 WARNING
Input 7 reported a warning.
Warning
216 INPUT 8 WARNING
Input 8 reported a warning.
Warning
61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kemppi A7 MIG Power Source 450 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info