686373
5
Zoom out
Zoom in
Vorherige Seite
1/18
Nächste Seite
5
Robot Gun Mount T2, T4© Kemppi Oy 2017 1712
OPERATING MANUAL
5.4 Signs used in the documentation
Items in the manual that require particular attention, to
minimize damage and personal injury, are indicated with
a three-level notication and warning system. Read these
sections carefully, and follow the instructions.
Note: These items give the user a useful piece of
information.
Caution: A caution item describes a situation that may
result in damage to the equipment or system.
Warning: Warnings describe a potentially dangerous
situation. If not avoided, it will result in personal harm or
fatal injury.
5.5 Warning and notice signs
The following warning and notice signs can be found on
the product:
Read and observe the operating instructions!
These markings must always be legible. They must not be
covered, obscured, painted over, or removed.
5.6 Emergency instructions
In the event of an emergency, immediately interrupt the
following:
The power supply
The ow of compressed air
Further measures are described in the operating
instructions or in the documentation of other peripheral
devices.
5.7 Operation safety
Please study these operation safety instructions and
respect them when installing, operating, and servicing
the machine.
The welding arc and spatter
The welding arc harms unprotected eyes. Also be careful
with reecting ashes from the arc. The welding arc and
spatter burn unprotected skin. Wear safety gloves and
protective clothing.
Danger of re or explosion
Pay attention to re safety regulations. Remove ammable
or explosive materials from the welding location. Always
reserve sucient re-ghting equipment at the welding
location. Be prepared for hazards in special welding jobs –
for example, the danger of re or explosion in welding of
container-type work pieces.
Fire can break out from sparks even several hours after
the welding is done!
Cables
Always check the cables before operating the equipment.
Replace damaged cables without delay.
Damaged cables may cause injury or start a re. Connection
cables must not be compressed or come in contact with
sharp edges or hot work pieces.
The welding power circuit
Isolate yourself by using proper protective clothing, and
do not wear wet clothing. Never work on a wet surface or
use damaged cables. Do not place the MIG gun or welding
cables on the welding machine or on other electric
equipment. Do not press the MIG guns switch if the gun is
not directed towards a work piece.
Welding fumes
Make sure that there is sufficient ventilation during
welding. Take special safety precautions when welding
metals that contain lead, cadmium, zinc, mercury, or
beryllium.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kemppi A7 Robot Gun Mount T4 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info