686373
10
Zoom out
Zoom in
Vorherige Seite
1/18
Nächste Seite
10
Robot Gun Mount T2, T4© Kemppi Oy 2017 1712
OPERATING MANUAL
11. FUNCTIONAL DESCRIPTION
The holding force of the inserted springs is directly applied to the release ange
and xes the switching axis, which is positioned by three pins, in the zero position.
In the event of collision, the switching axis tips over, the release ange pushes the
spring plate toward the base of the housing, and the trigger is actuated by the
spring plates actuating mechanism. The applied switching voltage is interrupted.
Figure 5: Functional diagram
M8×1 M9×0.5
3
1
2
3 Signal1
2 24 V2
1 GND3
1. 3-pole ange plug
2. Microswitch triggered
3. Microswitch in resting position
8. DELIVERY SCOPE
The delivery for a gas-cooled gun includes the following components:
Kemppi Robot Gun Mount T2 or T4
Operating instructions
Cylinder-head screws, M4×55 (6 pcs.)
Certicate of conformity
Connection cable
The equipment parts and wear parts are ordered separately.
Order data and ID codes for the equipment parts and wear parts can be found in the
current catalogue. Contact details for advice and for placing orders can be found
online at www.kemppi.com.
9. TRANSPORT
The components are carefully checked and packed; however, damage may still occur
during shipping.
Checking procedure on
receipt of goods
Check that the shipment is correct by referring to the
shipping note.
In case of damage
Check the package and components for damage (perform
a visual inspection).
In the event of problems
If the goods have been damaged during transport, contact
the last carrier immediately. Keep the packaging (for
possible checks by the carrier).
Packaging for return of
the goods
Use the original packaging and the original packaging
material. If you have questions about the packaging and
safety during shipment, please consult your supplier.
10. STORAGE
The physical conditions for storage in a closed room are -10 °C to 55 °C.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kemppi A7 Robot Gun Mount T4 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info