Bedienungsanleitung Kemppi FastMig X 350MV (Seite 15 von 30) (Englisch)

686414

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

available for MMA/CC/CV use.

To dene a new welding job, you need to make the necessary welding parameter selections

and then save them to a memory channel of your choice.

When you want to use these settings, you simply select the corresponding memory channel

number on the power source or wire feeder control panel and start welding. Only the most

often used controls are available in the wire feeder control panel, making welding easy and

convenient.

You can use and update any memory channel, unless it is locked via the four-digit

administrator pin code lock.

4.2.3 Creating the rst memory channel

If you are starting a new FastMig X 350MV that contains no memory channels, follow these

steps to create the rst memory channel.

1. Power on the machine from the main switch. You may need to press the control panel's Power

On button for 5 seconds to activate the X 37 control panel.

2. An empty memory channel appears. Press the NEW soft key.

3. With Create New selected, press SELECT soft key.

4. Select the desired welding process and other welding parameters.

• Use up and down arrow buttons to move around in the menus

• Approve selections by pressing the SELECT soft key.

5. When you have made all settings , press SAVE soft key to store the settings in the active

memory channel.

4.2.4 Creating the rst MMA/CC/CV memory channel

If you are starting a new FastMig X 350MV that contains no MMA/CC/CV memory channels,

follow these steps to create the rst MMA/CC/CV memory channel.

1. Press MENU button to display the main menu.

2. With up and down arrows, browse to MMA/CC/CV Mode (7/7) and press SELECT.

• MMA/CC/CV Mode view appears

3. With the adjustment knob, select ON and press SELECT.

• An empty MMA/CC/CV memory channel appears.

4. When an empty MMA/CC/CV memory channel appears, press NEW soft key.

5. With Create New selected, press SELECT soft key.

6. Select MMA, CC or CV and other parameters.

7. When you have made all settings, press SAVE soft key to store the settings in the active

memory channel.

4.2.5 Creating and modifying memory channels

1. Press MENU button to display the main menu.

2. With Edit Channel selected, press SELECT.

3. Select the channel number to be changed and press SELECT.

• Use up and down arrow buttons to browse the displayed channel numbers.

• Use Channel Info (F1) button to see the show the settings of the displayed channel.

• To create a new channel, select a channel that is marked (Empty).

4. Browse the menu to select the desired options and parameters.

• Use up and down arrow buttons to move around in the menus.

• Approve selections by pressing the SELECT soft key.

• See the welding parameters and functions section of this manual.

5. When you have made all settings, press SAVE soft key to store the settings in the selected

memory channel number.

When you have created a memory channel, the system is ready to weld. You select the desired

memory channel number on wire feeder's control panel, set the welding power and arc length

and start welding.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kemppi FastMig X 350MV Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info