Bedienungsanleitung Kemppi Kemparc SYN 300 (Seite 5 von 26) (Englisch)

686381

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

1. PREFACE

1.1 GENERAL

Congratulations on your choice of the Kemparc SYN-series welding system. Reliable

and durable, Kemppi products are aordable to maintain, and they increase your work

productivity.

This user manual contains important information on the use, maintenance and safety of

your Kemppi product. The technical specications of the device can be found at the end of

the manual. Please read the manual carefully before using the equipment for the rst time.

For your safety and that of your working environment, pay particular attention to the safety

instructions in the manual.

For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi

dealer, or visit the Kemppi web site at www.kemppi.com.

The specications presented in this manual are subject to change without prior notice.

NOTE! Items in the manual that require particular attention in order to minimise damage and

personal harm are indicated with this symbol. Read these sections carefully and follow their

instructions.

Disclaimer

While every eort has been made to ensure that the information contained in this guide

is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi

reserves the right to change the specication of the product described at any time without

prior notice. Do not copy, record, reproduce or transmit the contents of this guide without

prior permission from Kemppi.

1.2 INTRODUCTION

KempArc SYN is a product family for welding automation that includes all welding devices

needed in robot welding. The KempArc SYN welding system includes the following devices:

• KempArc SYN 300, SYN 400 and SYN 500 are synergetic welding power sources

designed particularly for welding automation that are suitable for MIG welding with

direct current. There are three power types of power sources: the 300, 400 and 500

ampere models. For more information on using power sources and their functions, see

"Power source".

• RF 59 is a control panel that contains the programs and welding parameters needed

in controlling the welding hardware. The panel functions allow the user to control the

operation of the welding hardware and adjust its welding settings. The control panel is

located in the front panel of the welding power source. For more information on using

the control panel and its functions, see "Control panel".

• KempArc DT 400 is a wire feeding device that feeds welding wire to the welding robot

at the speed it requires at any time. For more information on using the wire feeder and

its functions, see "Wire feeder".

This guide presents the functions, operation and technical properties of the above devices.

The devices also include the KempCool 10 cooler, but its functions and features are presented

in a separate guide.

The KempArc Synergic hardware is connected to the welding robot control system with the

control unit on top of the power source.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kemppi Kemparc SYN 300 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info