686279
128
Zoom out
Zoom in
Vorherige Seite
1/194
Nächste Seite
X8 MIG WELDER 2.4 Operation
To take WiseFusion into use, select Settings > Wise features > WiseFusion.
To adjust the welding power / wire feed speed, in the Control Pad's Welding view, turn the left knob.
To fine tune heat output, in the Control Pad's Welding view, turn the right knob.
Figure 36: WiseFusion Welding view
Introduction to WiseSteel
The WiseSteel function is based on modifying the conventional MIG/MAG arcs to enable higher quality of
welds. WiseSteel improves the arc control, reduces spatter and helps create an optimally-formed weld pool.
When using WiseSteel, different adjustment methods are applied at different power ranges (different arcs).
Within the short arc range, WiseSteel is based on adaptive short arc control; that is, the process adjusts the
short circuit ratio. This creates an easily-adjustable arc and less spatter. Within the short arc range, the shape
of the current is similar to the traditional short arc welding. When a short arc is used in vertical up welding
where weaving motion is applied, WiseSteel ensures good quality through adapting to the changes in the
stick-out length.
Using WiseSteel on globular arc range means that WiseSteel fluctuates the power between short arc and
spray arc at a low frequency, so that the average power stays within the globular arc range. This results in
less spatter than conventional globular arc welding, and a welding pool that enables excellent structural
durability.
Within the spray arc range, WiseSteel is based on adaptive arc length control, which keeps the arc optimally
short. WiseSteel also utilizes micro-pulsed welding current. This creates a well-formed weld pool that enables
excellent bead geometry and optimal penetration with smooth and durable joints, and speeds up the
work. The pulsing is not noticeable to the welder. The shape and control of the current are close to the
conventional spray arc welding.
Using WiseSteel
OPERATING MANUAL | EN 128
©
KEMPPI | 2018-09-28
128

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kemppi X8 MIG Welder wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kemppi X8 MIG Welder

Kemppi X8 MIG Welder Bedienungsanleitung - Deutsch - 198 seiten

Kemppi X8 MIG Welder Bedienungsanleitung - Holländisch - 196 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info