Bedienungsanleitung Kenwood CMOS 210 (Seite 2 von 116) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

536420

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

CMOS-310/CMOS-210

• When mounting this unit, make sure none of the leads are

trapped between this unit and the surrounding metalwork

or  ttings.

• Do not mount this unit near the heater outlet, where

it would be a ected by heat, or near the doors, where

rainwater might splash onto it. (Never install in locations

such as the above because of the danger of malfunction

due to high temperatures.)

• Before drilling any mounting holes always check behind

where you want to drill the holes. Do not drill into the gas

line, brake line, electrical wiring or other important parts.

• If this unit is installed in the passenger compartment,

anchor it securely so it does not break free while the car is

moving, and cause injury or an accident.

• If this unit is installed under a front seat, make sure it does

not obstruct seat movement. Route all leads and cords

carefully around the sliding mechanism so they do not get

caught or pinched in the mechanism and cause a short

circuit.

Care and maintenance

• When the product gets dirty, wipe dry with a silicon cloth

or soft cloth. If it is seriously stained, remove stain with

a cloth moistened with a neutral cleaner and then wipe

the cleaner away. Do not use a hard cloth and/or a volatile

substance such as lacquer thinner or alcohol, scratches,

deformation, degradation and/or damage may result.

• When a lens component gets dirty, wipe gently with a soft

cloth moistened with water. Do not rub with a dry cloth to

prevent scratching the lens.

Installation Procedure

1 To prevent a short circuit, remove the key from the

ignition and disconnect the - battery.

2 Make the proper input and output wire connections

for each unit.

3 Connect the wiring harness wires in the following

order: ground, ignition and camera unit.

4 Install the unit in your car.

5 Reconnect the - battery.

WARNING

• If you connect the ignition wire (Red) to the car chassis

(Ground), you may cause a short circuit, that in turn may

start a  re. Always connect those wires to the power source

running through the fuse box.

• Do not cut out the fuse from the ignition wire (Red). The

power supply must be connected to the wires via the fuse.

WARNING

To prevent injury or fire, take the following

precautions:

• To prevent a short circuit, never put or leave any metallic

objects (such as coins or metal tools) inside the unit.

• Installation and wiring of this product require specialist

skill and experience. To assure your safety, please request a

specialist technician to install the unit.

CAUTION

To prevent damage to the product, take the

following precautions:

• Make sure to ground the unit to a negative 12V DC power

supply.

• When replacing a fuse, only use a new fuse with the

prescribed rating. Using a fuse with the wrong rating may

cause your unit to malfunction.

• Do not use your own screws. Use only the screws provided.

If you use the wrong screws, you could damage the unit.

NOTE

• This product is a rear view camera for checking the view at

the rear of a car.

• A rear view camera is a camera that provides symmetrical

images in the same way as rear and side view mirrors.

• Connection to a TV with an RCA video input is possible,

but con rm whether the TV you use has a reverse gear

connection function.

• This product is designed to supplement the driver’s rear

view, but the camera images do not show all dangers and

obstacles. Be sure to look behind you when reversing to

con rm the view.

• This product features a wide-angle lens, so the near view

is wide and the far view is narrow, which may create a

false sense of distance. Be sure to look behind you when

reversing to con rm the view.

• Do not wash your car with an automatic car wash or

high-pressure water as it may result in water entering the

camera or the camera falling o .

• Check camera bracket installation before driving.

Are the screws loose?

- Is the camera bracket  rmly secured?

- If the rear view camera comes loose while you are driving

it may cause an accident.

• Before  nally installing the unit, connect the wiring

temporarily, making sure it is all connected up properly,

and the unit and the system work.

Before Use/ Installation Procedure

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood CMOS 210 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info