Bedienungsanleitung Kenwood DNX5160DABS (Seite 19 von 22) (Englisch)

672810

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Your navigation system can receive traffic

information using the built-in traffic receiver

or a subscription to INRIX

Traffic Service.

The traffic receiver must be in data range of

a station transmitting traffic data to receive

traffic information. The traffic subscription

activates automatically after your navigation

system acquires satellite signals while

receiving traffic signals from the service

provider. When receiving INRIX traffic

information, FM TMC information is not

displayed. You can add other subscriptions

at any time. For information about traffic

receivers and coverage areas, go to

www.garmin.com/kenwood.

NOTE: INRIX Traffic Service and FM TMC

Traffic are not available on all models or in

all areas.

Traffic Data Using

INRIX Traffic

Service

You can purchase a traffic subscription to

receive traffic data using INRIX

traffic

service. When your navigation system is

connected to INRIX and within a traffic

coverage area, your system begins

displaying traffic information. Traffic data is

not available in all areas or regions.

See the KENWOOD Traffic Powered By

INRIX™ application for INRIX traffic

subscription information.

FM TMC Traffic

FM Traffic Message Channel (TMC) traffic

receivers receive traffic information

broadcast over the FM Radio Data System.

The FM TMC subscription activates

automatically after your navigation system

acquires satellite signals while receiving

traffic signals from the service provider. You

can add other FM TMC subscriptions at any

time.

NOTE: The availability of FM TMC depends

on your region and may require the

purchase of a subscription.

For information about traffic receivers and

coverage areas, go to www.garmin.com

/kenwood.

About the Traffic Icon

When you are receiving traffic information, a

traffic icon appears on the map. The traffic

icon changes color to indicate the severity of

traffic conditions.

Green: Traffic is flowing freely.

Yellow: Traffic is moving, but there is a

delay. There is moderate traffic

congestion.

Red: Traffic is not moving or moving very

slowly. There is a severe delay.

Gray: Traffic information is not available.

Traffic on Your Route

Viewing Traffic on Your Route

While navigating a route, select .

Select Traffic On Route.

A list of traffic events appears, organized

by their location on the route.

Select an event.

Manually Avoiding Traffic on Your

Route

From the map, select .

Select Traffic On Route.

If necessary, use the arrows to view other

traffic delays on your route.

Select > Avoid.

Taking an Alternate Route

While navigating an automobile route,

select .

Select Alternate Route.

Select a route.

Viewing Traffic on the Map

The traffic map shows color-coded traffic

flow and delays on nearby roads.

From the map, select .

Select Traffic Conditions.

Traffic in Your Area

Searching for Traffic Delays

From the map page, select .

Select Traffic Conditions > .

Select an item in the list.

If there is more than one delay, use the

arrows to view additional delays.

About Traffic 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood DNX5160DABS Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood DNX5160DABS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info