159527
83
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
83
Knowledge sections
Important Items
Displayed messages and actions to be taken against them
In case of difficulty
* Every MD contains data named TOC (Table Of Contents) in addition to audio data. The TOC corresponds to the table of
contents of a book and includes non-rewritable data among information on the number of tracks, their playing time,
character information, etc.
In addition to the TOC, every recordable MD also contains specific data called UTOC. The UTOC includes non-rewritable
data among information on the number of tracks, their playing time, character information, etc.
MeaningDisplayed Message
BLANK DISC ÷ The MD contains no recording at all.
BUFFER OVER ÷ An attempt is made to record more than 100 CD tracks within 74 minutes with
high-speed recording.
CAN'T EDIT ÷ An attempt is made to edit a track which is too short.
DISC ERROR ÷ The contents of UTOC* is abnormal. Perform "ALL ERASE".
Y
If this is impossible, use another MD.
DISC FULL ÷ The disc does not have a recordable space any more or an attempt is made to
record a 256th track. Use another MD. Note that it is not permitted to record more
than 255 tracks in a disc.
FULL ÷ An attempt is made to select the 33rd track in "Q.ERASE" or "Q.MOVE". WY
MD WRITING ÷ The data related to editing or recording is being written in the MD.
NO TRACKS ÷ The MD does not contain any tracks and has only the disc title.
PGM FULL ÷ An attempt is made to select a 33rd track in programming of CD or MD.
PGM Mode ÷ An attempt is made to start random playback, high-speed recording (CD = MD) or
MD editing in the program mode. Exit from the program mode before these opera-
tions.
PLAY ONLY ÷ An attempt is made to record signals in a playback-only MD. Use a recordable MD.
PROTECTED ÷ The MD in use is protected against recording. Enable recording.
l
The cassette in use is protected by breaking the erasure protection tab. Attach a
piece of tape on the hole made by breaking the tab. k
RANDOM Mode ÷ An attempt is made to perform MD O.T.E. recording or TAPE O.T.E. recording while
the unit is in the CD random play mode. Exit from the random play mode.
READING ÷ The TOC* data is being read out.
SCMS ÷ An attempt is made to record the digital signal from a source subjected to digital
copy prohibition by SCMS. The digital output from this source cannot be recorded.
TEXT FULL ÷ An attempt is made to display the text data of a CD-TEXT disc containing more than
1 kB of text data.
TITLE FULL ÷ An attempt is made to input a title by exceeding the restriction of the maximum
number of characters. The maximum number of input characters is 1792 charac-
ters per disc and 80 characters per track (including "LP:").
Blinking "?" ÷ Confirmation message asking if a setting or MD editing can be executed.
83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood hm 383 md wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info