Bedienungsanleitung Kenwood KMM-100AY (Seite 12 von 15) (Englisch)

565291

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

TROUBLESHOOTING

Symptom Remedy

Sound cannot be heard. • Adjust the volume to the optimum level.

• Check the cords and connections.

“PROTECT” appears and no

operations can be done.

Check to be sure the terminals of the speaker wires are

insulated properly, then reset the unit. If this does not

solve the problem, consult your nearest service center.

• Sound cannot be heard.

• The unit does not turn on.

• Information shown on the

display is incorrect.

Clean the connectors.

( 2)

The unit does not work at all. Reset the unit.

( 3)

• Radio reception is poor.

• Static noise while listening to

the radio.

• Connect the antenna firmly.

• Pull the antenna out all the way.

“NA FILE” appears.

Make sure the media contains supported audio files.

( 10)

“READ ERROR” appears. Copy the files and folders onto the USB device again. If this

does not solve the problem, reset the USB device or use

another USB device.

“NO DEVICE” appears. • Connect a USB device, and change the source to USB again.

• SD card is not inserted properly. Insert an SD card, and

change the source to SD again.

“COPY PRO” appears. A copy-protected file is played.

“NA DEVICE” appears. •

Connect a supported USB device, and check the connections.

• Insert a supported SD card properly.

“NO MUSIC” appears. Connect a USB device or insert an SD card that contains

playable audio files.

“iPod ERROR” appears. Reconnect the iPod. / Reset the iPod.

“READING” keeps flashing. Do not use too many hierarchical levels or folders.

Elapsed playing time is not

correct.

This is caused by how the tracks are recorded.

Correct characters are not

displayed (e.g. album name).

This unit can only display uppercase letters, numbers,

and a limited number of symbols. Uppercase Cyrillic

letters can also be displayed if

[RUSSIAN SET]

is set to

[РУССКИЙ BКЛ].

( 5)

MORE INFORMATION

General

Detailed information and notes about the

playable audio files are stated in an online

manual on the following web site:

www.kenwood.com/cs/ce/audiofile/

Playable files

• Playable audio file: MP3 (.mp3), WMA

(.wma), WAV(.wav), FLAC (.flac)

• Playable USB device file system: FAT12,

FAT16, FAT32

Even when audio files comply with the

standards listed above, playback may be

impossible depending on the types or

conditions of media or device.

About USB devices

•

This unit can play MP3/WMA/WAV/FLAC files

stored on a USB mass storage class device.

• You cannot connect a USB device via a USB

hub.

• Connecting a cable whose total length is

longer than 5m may result in abnormal

playback.

•

This unit cannot recognize a USB device whose

rating is other than 5V and exceeds 1A.

About SD card

• This unit is capable of playback of SD/SDHC

memory cards complying with the SD or

SDHC standard:

SD card (≤2 GB), SDHC card (≤32 GB)

• A special adapter is required to use a

miniSD card, miniSDHC card, microSD card

or microSDHC card.

•

The MultiMedia Card (MMC) cannot be used.

• Data recorded in the SD audio format

cannot be played back.

About KENWOOD Music Editor

Light and KENWOOD Music

Control

•

This unit supports the PC application

KENWOOD Music Editor Light and Android™

application KENWOOD Music Control.

• When you play audio files with song data

added using the KENWOOD Music Editor

Light or KENWOOD Music Control, you can

search for audio files by Genres, Artists,

Albums, Playlists, and Songs.

• KENWOOD Music Editor Light and

KENWOOD Music Control are available on

the following web site:

www.kenwood.com/cs/ce/

About iPod/iPhone

Made for

- iPod touch (1st, 2nd, 3rd, 4th, and 5th

generation)

- iPod classic

- iPod nano (3rd, 4th, 5th, 6th, and 7th

generation)

- iPhone, iPhone 3G, 3GS, 4, 4S, 5

• For the latest compatible list and software

versions of iPhone/iPod, see: www.

kenwood.com/cs/ce/ipod

• To connect devices featuring Lightning

connector, both KCA-iP102 (optional

accessory) and Apple Lightning to 30-pin

Adapter (accessory of the iPod/iPhone) are

required.

Do not leave the Apple Lightning to 30-pin

Adapter inside the car to prevent damages

caused by the hot temperature.

• You cannot operate iPod if “KENWOOD” or

“

” is displayed on iPod.

EN_KMM_361SD_001A_EN_f.indd 10EN_KMM_361SD_001A_EN_f.indd 10 9/10/2013 12:05:45 PM9/10/2013 12:05:45 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KMM-100AY Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KMM-100AY

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info