Bedienungsanleitung Kenwood KRF-V5070D (Seite 17 von 36) (Englisch)

477378

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

Preparing for surround sound

Speaker settings

To enable you to obtain optimum enjoyment from the receiver’s listening

modes, make sure to complete the speaker settings (subwoofer, front,

center, and surround speakers) as described below.

Turn on the power to this receiver by pressing POWER ON/

OFF and ON/STANDBY

or POWER key.

Press the SETUP key to enter the SETUP mode and use the

MULTI CONTROL knob or keys for the following displays.

1 SP SETUP

2 TESTTONE

3 DISTANCE

4 EXIT

The flow of the SETUP is as follows;

SP SETUP TESTTONE DISTANCE EXIT

Front

Center

Surround

SP System

MANUAL

AUTO

Full Range

2Way 2Speaker

2Way 3Speaker

Others

Subwoofer

Front

Center

Surround

Subwoofer Re-mix

Select a speaker system.

1 Select SP SETUP and press the SETUP key again so that the

speaker system indication “SP SYSTEM” scrolls across the

display.

2 Use the MULTI CONTROL knob or keys to select the speaker

system setting.

1 FULL RANGE : For selected Kenwood speaker – for example,

KS-207HT.

2 2WAY 2SPKR : For selected Kenwood speaker – for example,

KS-307HT.

3 2WAY 3SPKR : For selected Kenwood speaker – for example,

KS-707HT.

4 OTHERS : For general speakers.

• The selection of FULL RANGE, 2WAY 2SPKR or 2WAY 3SPKR

should only be used with 5 channels speaker system setting.

• When the setting FULL RANGE, 2WAY 2SPKR or 2WAY 3SPKR

is selected, the procedure skips to step 4.

3 For general speaker setting, use the MULTI CONTROL knob or

keys to select OTHERS and press the SETUP key again.

• The subwoofer setting indication “SUBW ON” appears.

4 Use the MULTI CONTROL knob or keys to select the

appropriate subwoofer setting.

1 SUBW ON : Subwoofer setting mode to the receiver is ON.

2 SUBW OFF :

Subwoofer setting mode to the receiver is OFF.

• The initial setting is “SUBW ON”.

• When the setting “SUBW OFF” is selected, the front speakers

are automatically set to “FRNT LRG” and the procedure skips to

step 8.

Before step 8, press the SETUP key to accept the setting.

• When subwoofer output sound is required, select “FRNT NML”.

5 Press the SETUP key to accept the setting.

• The front speakers setting indication “FRNT NML” appears.

6 Use the MULTI CONTROL knob or keys to select the

appropriate front speakers setting.

1 FRNT NML (normal) : Average size front speakers are

connected to the receiver.

2 FRNT LRG (large) : Large front speakers are connected to

the receiver.

• For “FRNT LRG” selection, no sound will be heard from subwoofer

speaker even when it is set to ON. However, if you select “SW

RE-MIX ON” when subwoofer is selected, you will be able to

hear sound from the subwoofer.

When in STEREO mode, the sound goes directly to front speaker.

7 Press the SETUP key to accept the setting.

• The center speaker setting indication “CNTR NML” appears.

8 Use the MULTI CONTROL knob or keys to select the

appropriate center speaker setting.

If you have selected “LRG” as the front speakers setting,

1 CNTR NML (normal) : An average size center speaker is

connected to the receiver.

2 CNTR LRG (large) : A large center speaker is connected to

the receiver.

3 CNTR OFF : Center speaker setting mode to the

receiver is OFF.

If you have selected “NML” as the front speakers setting,

1 CNTR ON : Center speaker setting mode to the

receiver is ON.

2 CNTR OFF : Center speaker setting mode to the

receiver is OFF.

9 Press the SETUP key again to accept the setting.

•The surround speaker setting indication “SURR NML” appears.

0 Use the MULTI CONTROL knob or keys to select the

appropriate surround speaker setting.

If you have selected “LRG” as the center speaker setting,

1 SURR NML (normal) : Average size surround speakers are

connected to the receiver.

2 SURR LRG (large) : Large surround speakers are connected

to the receiver.

3 SURR OFF : Surround speaker setting mode to the

receiver is OFF.

MULTI CONTROL

SETUP

POWER ON/OFF

SETUP

MULTI

CONTROL

POWER

ON/STANDBY

Continued to next page

*5339/17-21/EN 10/1/03, 8:35 PM17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KRF-V5070D Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood KRF-V5070D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info