Bedienungsanleitung Kenwood KRF-V6060D (Seite 2 von 44) (Englisch)

40357

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Units are designed for operation as follows.

U.S.A. and Canada........................................... AC 120 V only

Australia ........................................................... AC 240 V only

Europe and U.K. ............................................... AC 230 V only

China and Russia ............................................. AC 220 V only

Other countries .......... AC 110-120 / 220-240 V switchable*

For the United Kingdom

Factory fitted moulded mains plug

1. The mains plug contains a fuse. For replacement, use only a 13-

Amp ASTA-approved (BS1362) fuse.

2. The fuse cover must be refitted when replacing the fuse in the

moulded plug.

3. Do not cut off the mains plug from this equipment. If the plug fitted

is not suitable for the power points in your home or the cable is too

short to reach a power point, then obtain an appropriate safety

approved extension lead or adapter, or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and

dispose of the plug immediately, to avoid a possible shock hazard

by inadvertent connection to the mains supply.

IMPORTANT: The wires in the mains lead are coloured in accordance

with the following code:

Blue : Neutral

Brown : Live

Do not connect those leads to the earth terminal of a three-pin plug.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Safety precautions

WARNING :

TO PREVENT FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL,

WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO

ALERT THE USER TO THE PRESENCE OF UNINSULATED

“DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S EN-

CLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO

CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRI-

ANGLE IS INTENDED TO ALERT THE USER TO THE PRES-

ENCE OF IMPORTANT OPERATING AND MAINTENANCE

(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOM-

PANYING THE APPLIANCE.

Before applying the power

Caution : Read this page carefully to ensure safe

operation.

* AC voltage selection

The AC voltage selector switch on the rear panel is set to the voltage

that prevails in the area to which the unit is shipped. Before

connecting the power cord to your AC outlet, make sure that the

setting position of this switch matches your line voltage. If not, it

must be set to your voltage in accordance with the following direction.

VOLTAGE SELECTOR

AC 110-

120V~

AC 220-

240V~

Note:

Our warranty does not cover damage caused by excessive line

voltage due to improper setting of the AC voltage selector switch.

AC voltage selector switch

Move switch lever to

match your line voltage

with a small screwdriver

or other pointed tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood KRF-V6060D Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info