4-English
Installation
Installation
Securing to audio board
■
Attach the installation brackets to the
bottom of the KVA-S300 using the binding
screws (ø3 x 6mm).
1
Peel off the protection paper from the Velcro strip
(Accessory 3) and paste the one side to the
bottom of the KVA-S300 and the other side to the
body of the vehicle.
Please do not install the unit near the
dashboard, the rear tray, or other important
components. Doing so could lead to injury or
accident should the unit come off due to a
shock and strike a person or an important
component.
Tapping screws should be used for mounting.
(Attachment with velcro strips, although easy,
can come off with a shock.)
2CAUTION
Mount the KVA-S300 to an audio board using
the self-tapping screws (ø4 x 12mm).
2
Securing to the body of the vehicle
■
Velcro strips
(Accessorye)
Installation
brackets
(Accessoryw)
Tapping screw
(ø3X6mm)
(Accessoryu)
Tapping screw
(ø4X12mm)
(Accessoryi)
Attaching the remote controller
Clean the place where you want to attach
the remote controllor with a detergent to
remove dirt or oil and wipe the surface with
a soft dry cloth.
1
Attach the remote controller to the center
console or any convenient place using the
supplied Velcro strips.
If you find that the Velcro strips (Loop:
Accessory5) will not attach to the center
console surface, provide the double-sided
adhesive tape (Accessory6) to the Velcro for
secure attachment. (Paste the yellow
protection paper side to the Velcro strip and
the transparent protection paper side to the
body of the vehicle.)
NOTE
2
Velcro strips
(Loop:Accessory
5)
Velcro strips
(Hook:Accessory4)
Installation board,etc.
(thickness:15mm or more)
