Bedienungsanleitung Kenwood SMP060 (Seite 4 von 126) (Alle Sprachen)

630886

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

efore using for the first

time

ash the parts: see ‘care &

leaning’.

key

햲 dispensing lid X 2

햳

sports bottle X 2

햴 sealing ring

햵 blade unit

햶 blade holder

햷 power unit

햸 speed control

to use your blender

1 Add ingredients to the bottle. For

best blending performance always

add ice/ frozen ingredients to the

bottle last. Ingredients can be

added up to the 600ml level mark.

When adding frozen ingredients

such as frozen fruit, yoghurt, ice

cream or ice do not blend more

than 60g or 3 ice cubes.

2 Fit the sealing ring 햴 to the blade

unit 햵, ensuring the seal is located

correctly in the grooved area.

Leaking will occur if the seal is

damaged or incorrectly fitted.

3 Clip the blade unit 햵 into the

blade holder 햶.

4 Hold the underside of the blade

assembly and lower it onto the

bottle, blades down – turn

clockwise to lock .

5 Shake to disperse the ingredients.

6 Fit the blender to the power unit -

line up the tabs on the bottle with

the grooves  in the power unit

and then turn clockwise until a

positive click is heard .

7 Select the required speed.

When blending recipes that include

frozen ingredients turn the speed

control to ‘low’ for 5 seconds to

start the mixing process, then turn

the speed control to ‘high’.

Allow the ingredients to blend until

smooth.

When the desired consistency is

reached, turn the speed control to

he ‘off’ position. Turn the bottle

nticlockwise to release it from the

power unit.

Turn the bottle the other way up

nd unscrew the blade assembly.

10 Fit and lock the lid by turning

lockwise.

hen you want to drink, simply flip

open the lid cover . The drink

can be consumed straight from the

bottle.

hints & tips

Note that when the bottle is filled

to max capacity (600ml), this is

approximately two servings.

If you do not intend to consume

your drink immediately, keep it

refrigerated.

Ensure your drink is thin enough to

be able to drink from the

dispensing lid. To make a thinner

drink add more liquid.

Once your drink has reached the

desired consistency, you can use

the pulse ‘P’ to ensure all

ingredients are thoroughly blended.

Use the pulse ‘P’ to operate the

power unit in a start stop action to

control the texture of your drink.

After blending, some drinks may

not be completely smooth due to

seeds or the fibrous nature of

ingredients.

Some drinks may separate on

standing, therefore it is best to

drink them straight away.

Separated drinks should be stirred

before drinking.

important

Do not blend more than 3 ice

cubes (approx. 60g) at a time.

Never blend dry ingredients (e.g.

spices, nuts) or run the Blender

empty.

Do not use the Blender as a

storage container whilst on the

power unit.

Some liquids increase in volume

and froth during blending e.g. milk,

so do not overfill and ensure the

blade assembly is correctly fitted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood SMP060 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info