511227
32
Zoom out
Zoom in
Vorherige Seite
1/33
Nächste Seite
26
AUTO REPLY MESSAGE
You can set the transceiver to automatically respond to Individual Calls (while
using FleetSync):
1 Press the key programmed as Auto Reply Message to enter Auto Reply
Message mode.
The Auto Reply Message indicator ( ) appears on the display.
2 When you receive an Individual Call, Auto Reply will begin after waiting for
3 seconds, the transceiver will send an automatic response to the caller,
and “ ” appears on the display.
If you are available to receive the call, press any key to disable the auto
response.
If memory is available on your transceiver for recording, “I am not available.
Leave your Message.” will be sent to the caller. The caller can then leave a
recorded message on your transceiver which you can later recall and listen to.
When a message is stored on your transceiver, “
” appears on the
display.
If no memory is available on your transceiver for recording, “I am not available.”
will be sent to the caller and “ ” appears on the display.
PLAYBACK
To play back a recorded conversation, memo, or message:
1 Press the key programmed as Playback to enter Playback mode.
If the last action on your transceiver was to auto record your conversation,
” will appear on the display, otherwise a recording channel with the time
of the recording will appear. To store the conversation record in the next
available recording channel, press the key. To clear the conversation, press
the A or DTMF # key. To skip to the stored recording channels, press the S or
DTMF
key. To skip back 5 seconds, press the <B key. To skip ahead
5 seconds, press the C> key.
2 Press the and keys to select the channel which you want to play back.
•“” represents automated reply messages.
•“” represents conversation records.
•“” represents voice memos.
3 The transceiver will announce the channel, then the recording will
automatically play back.
When the entire recording has been played, “ ” (end of message) is
displayed.
•To delete the selected recording, press the A or DTMF # key. To clear all the
recorded data, press and hold the A or DTMF # key. A confirmation message
will appear on the display. Press the S or DTMF
key to delete the
recording(s) or the A or DTMF # key to cancel.
VOICE GUIDE
When changing the zone, channel, or operation mode, an audio voice will
announce the new zone, channel, or mode, after it has been selected. (Voice
Annunciation can be activated or deactivated by your dealer.)
32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kenwood TK-7180 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kenwood TK-7180

Kenwood TK-7180 Bedienungsanleitung - Deutsch - 32 seiten

Kenwood TK-7180 Bedienungsanleitung - Holländisch - 32 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info