Bedienungsanleitung Kenwood XXV-05V (Seite 4 von 116) (Englisch)

565545

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

4 English

To prevent injury and/or fire, take the following

precautions:

• Ensure that the unit is securely installed. Otherwise it

may fly out of place during collisions and other jolts.

• When extending the ignition, battery or ground wires,

make sure to use automotive-grade wires or other wires

with an area of 0.75mm

(AWG18) or more to prevent

cable deterioration and damage to the cable coating.

• To prevent short circuits, never put or leave any metallic

objects (e.g., coins or metal tools) inside the unit.

• If the unit starts to emit smoke or strange smells, turn

off the power immediately and consult your Kenwood

dealer.

• Do not touch the liquid crystal fluid if the LCD is

damaged or broken due to shock. The liquid crystal fluid

may be dangerous to your health or even fatal.

If the liquid crystal fluid from the LCD contacts your body

or clothing, wash it off with soap immediately.

To prevent damage to the machine, take the

following precautions:

• Make sure to ground the unit to a negative 12V DC

power supply.

• Do not open the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct sunlight

or excessive heat or humidity. Also avoid places with too

much dust or the possibility of water splashing.

• Do not subject the faceplate to excessive shock, as it is

a piece of precision equipment.

• When replacing a fuse, only use a new one with the

prescribed rating. Using a fuse with the wrong rating

may cause your unit to malfunction.

• To prevent short circuits when replacing a fuse, first

disconnect the wiring harness.

• Do not use any screws except for the ones provided.

The use of improper screws might result in damage to

the main unit.

• You cannot view video pictures whilst the vehicle is

moving. To enjoy TV/video pictures, find a safe place to

park and engage the parking brake.

• If you experience problems during installation, consult

your Kenwood dealer.

• If the unit does not seem to be working right, try

pressing the reset button first. If that does not solve the

problem, consult your Kenwood dealer.

Screen brightness during low temperatures

When the temperature of the unit falls such as during

winter, the liquid crystal panel's screen will become darker

than usual. Normal brightness will return after using the

monitor for a while.

Audio units you can control from the

XXV-05V Receiver (As of January, 2005):

KDC-CX89, KDC-CX87, KDC-CX85, KDC-C719, KDC-C717,

KDC-C715, KDC-C669, KDC-C667, KDC-C665, KDC-C469,

KDC-C467, KDC-C465, KDC-D301, KTC-9090DAB,

KDV-C830, KDV-C840, KDV-C860, KTC-SR901, KTC-SR902,

KTC-SR903, KPA-SS100, KPA-CP100, KTC-WB100

(Set the "O-N" switch to "N" position if provided.)

Navigation units you can control from the

XXV-05V Receiver (As of January, 2005):

KNA-DV2100, KNA-DV3100, KNA-DV4100

Loading and Replacing the battery

1. Use two "AAA"-size batteries.

Slide the cover while pressing downwards to remove it

as illustrated.

2. Insert the batteries with the + and - poles aligned

properly, following the illustration inside the case.

Store unused batteries out of the reach of children. Contact

a doctor immediately if the battery is accidentally

swallowed.

Do not set the remote on hot places such as above the

dashboard.

• The provided batteries are intended for use in operation

checking, and their service life may be short.

• When the remote controllable distance becomes short,

replace both of the batteries with new ones.

Cleaning the panel and monitor

When the operator panel and monitor panels are dirty, wipe

and clean them using a soft cloth (such as a commercially

available silicon coated cloth). When contaminated

excessively, clean them using a cloth dipped in a neutral

detergent first, then remove the detergent using a dry

cloth.

Do not use a hard cloth and a volatile chemical (such as an

alcohol). If used, the panel surface may be scratched or

printed letters may be erased.

Cleaning the disc slot

As dust can accumulate in the disc slot, clean it

occasionally. Your discs can get scratched if you put them

in a dusty disc slot.

Lens Fogging

Right after you turn on the car heater in cold weather, dew

or condensation may form on the lens in the disc player of

the unit. Called lens fogging, discs may be impossible to

play. In such a situation, remove the disc and wait for the

condensation to evaporate. If the unit still does not operate

normally after a whilst, consult your Kenwood dealer.

2WARNING

NOTE

2CAUTION

2WARNING

Before Use

Reset button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood XXV-05V Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood XXV-05V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info