Bedienungsanleitung Ketron SD1 PLUS (Seite 140 von 140) (Englisch)

677866

140

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Create to confirm.

●

Press F4 Copy.

●

On the page that appears now press F1 Source and enter the Style to be modified using the VALUE +/- buttons or directly on the numeric

keypad (STYLES buttons).

●

Maintain the option Global in F3, where the Style part to be copied is defined, and maintain the option All Parts in F4, where the traces to

be copied are defined. Global and All Parts must also be set in F8 and F9. Press F10 Execute to confirm. At the end, press F5 Escape to

return to the first page of Pattern Edit..

ASSIGNING THE AUDIO LOOP TO THE DRUM 2 TRACK

The Drum 2 track within the Style is the only one enabled to use sampled audio loops or Live Drums. You must therefore assign it the loop you

are going to use.

●

Press F1 Record from the first page of Pattern Edit.

●

Use the CURSOR +/- buttons to go to Drum 2.

●

Proceed as follows to assign the audio loop to the track: Use the special button (the LED lights up) to all up the RAM/FLASH bank and use

the function buttons to select the audio loop loaded in the RAM. Press EXIT to go back to the Record page.

●

Repeat the same operation for the other Style sections indicated in F1 and use the VALUE +/- buttons to call them up. This allows you to

decide which Style sections are to use the audio loop. The SD1 makes it possible to assign up to 8 audio loops, one for each Style section.

●

Once you have completed your settings, save them pressing F5 Save and then press the EXIT button to go back to the initial Pattern Edit

page.

●

You also may modify the audio loop velocity, which automatically modifies the Volume. For this purpose, enter the F1 Record menu from the

initial Pattern Edit page and select F9 Velocity. The F6 Wave Velocity parameter is modified pressing the VALUE +/- buttons. Press F5

Escape to go back to the initial page.

ACTIVATING THE LOOP SYNC

●

On the initial Pattern Edit page, activate function F9 Wave Sync.

●

The page displayed allows you to activate the Loop Sync for the single Style sections pressing the relevant function button and setting the

parameter to On.

●

Press F10 Save to save the settings and press EXIT to exit from Pattern Edit.

USING THE STYLE WITH LOOP SYNC

The Style modified according to the above procedure is saved on the hard disk as a

Single Style and can be called up at any time pressing the SINGLE RAM STYLE button and entering the number on the numeric keypad (STYLES

buttons), or selecting it from folder 95 “Styles” (if Master Folder is active) from the displayed list by pressing the BLOCK/LIST RAM STYLE

button.

The name and the number of the selected Style are indicated on the left top of the display. To modify volume, reverb, effects and pan of the

loop assigned to Drum 2, use the Arrange View parameters.

Any time you use the Style with a loop that was sampled in Sync, SD1 loads into the RAM memory the relevant audio samples. To avoid too long

waiting times, it is recommended to create a Style Block to be loaded on switching on the instrument.

SD1 Owner’s Manual

140

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ketron SD1 PLUS Seite 140

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ketron SD1 PLUS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info