Bedienungsanleitung Kettler 7178-600 Champ 5.0 (Seite 2 von 15) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

566319

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Assembly Instructions

Before assembling or using the table-tennis table, please read the following instructions carefully. They contain important

information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions

in a safe place for maintenance purposes or for ordering spare parts.

All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant process of quality

ntrol

during manufacturing. The knowledge gained in this process is used to constantly improve and develop our products. In order

to offer

our customers the very best in product quality, we reserve the right to make technical changes at any time. In spite of this,

should you

have any cause for complaint, please contact your KETTLER dealer.

Note on Safety

The table-tennis table should be used only for its intended

pur

pose, i.e. for playing with suitable table-tennis bats and balls.

All other uses are prohibited and may be dangerous. The

man

ufacturer cannot be held liable for damage or injury caused

by improper use of the table.

Damaged or worn components may endanger your safety or

shorten the lifespan of the table-tennis table. Replace worn or

damaged components immediately and remove the table from

use until this has been done. Use only spare parts manufactured

by KETTLER.

The table-tennis table complies with all safety regulations.

correct repairs, alterations to the design (removal of original

parts, addition of other components etc.) may endanger the

safety of the user.

Instruct other persons (in particular children) using the table in

its correct use, and draw their attention to any potential source

of danger, especially when setting up or dismantling the table.

Caution: While assembly of the product keep off children’s

reach (Choking hazard - contains small parts).

When setting up or dismantling the table, stay clear of its

folding radius.

When folded up, the table-tennis table presents a large surface

to the wind. For this reason, ensure that it is stored in a

shel

tered position.

The table-tennis table may be pushed only into the transport

position because there is otherwise a danger of injury.

The unit complies with the standard EN 14468–1:2004.

Depending on frequency of use, check all screws, bolts etc.

regularly to ensure that they are in good condition.

In case of enquiry, please contact your KETTLER dealer.

Do not use the table-tennis table until it has been fully and

cor-

rectly assembled and checked.

Ensure that table-tennis tables which are not weatherproof are

not exposed to dampness or rain. Keep them well away from

direct sources of heat. Should the surface become warped, lay

the table on a level surface for a few days.

Set the table up on a level surface.

Do not cover it with plastic foil, under which condensation may

form. We recommend the weatherproof KETTLER tarpaulin, art.

no. 7032-300.

For practising without a partner, the table halves can be folded

up singly.

For more information on the sport of table-tennis, you are

ferred to the specialist literature on the subject.

Do not use corrosive or abrasive materials to clean the

equipment.

Ensure that such materials are not allowed to pollute the

environment . In most cases, a slightly dampened cloth is sufficient.

Waste Disposal: KETTLER products are recyclable. At the end of

its useful life please dispose of this article correctly and safely

(local refuse sites).

Instructions for Assembly

The equipment must be assembled with due care by two adult

persons.

Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause

for complaint, please contact your KETTLER dealer.

Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the

dia

grams. The correct sequence is given in capital letters.

Please note that there is always a danger of injury when

working with tools or doing manual work. Therefore please be

care

ful when assembling this machine.

Ensure that your working area is free of possible sources of

danger, for example don’t leave any tools lying around. Always

dispose packaging material in such a way that it may not cause

any danger. There is always a risk of suffocation if children

play with plastic bags!

Caution: While assembly of the product keep out children’s

reach (Choking hazard - contains small parts).

The fastening material required for each assembly step is shown in

the diagram inset. Use the fastening material exactly as instructed.

Bolt all the parts together loosely at first, and check that they

have been assembled correctly. Tighten the locknuts by hand

until resistance is felt, then use spanner to finally tighten nuts

completely against resistance (locking device).Then check that

all screw connections have been tightened firmly. Attention:

once locknuts have been unscrewed they no longer function cor-

rectly (the locking device is destroyed), and must be replaced.

For technical reasons, we reserve the right to carry out

preliminary assembly work (e.g. addition of tubing plugs).

Please keep original packaging of this article, so that it may be

used for transport at a later date, if necessary. Goods may

only be

returned after prior arrangement and in (internal) packaging, which

is safe for transportation, in the original box if possible. It is impor-

tant to provide a detailed defect description / damage report!

List of spare parts

When ordering spare parts, always state the full article number,

spare-partnumber, the quantity required and the S/N of the pro-

duct (see spare parts drawing).

Example order: Art. no. 07138-600 / spare-part no. 94130118

/ 2 pieces / S/N......

Important: spare part prices do not include fastening material; if

fastening material (bolts, nuts, washers etc.) is required, this

should be clearly stated on the order by adding the words „with

fastening material“.

KETTLER GB Ltd.

Kettler House, Merse Road

North Moons Moat

Redditch, Worcestershire B98 9HL

+44 1527 59190

1 +44 1527 62423

www.kettler.co.uk Mail: sales@kettler.co.uk

Handling the equipment

Kettler 7178-600 Champ 5.0 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info