Bedienungsanleitung Kettler Run 11 - 07886-500 (Seite 5 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

736640

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Assembly Instructions GB

Handling

Instructions for Assembly

■Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause

for complaint, please contact your KETTLER dealer.

■Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the dia-

grams. The correct sequence is given in capital letters.

■The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if

possible technically talented.

■Please note that there is always a danger of injury when wor-

king with tools or doing manual work. Therefore please be

careful when assembling this machine.

■Ensure that your working area is free of possible sources of dan-

ger, for example don’t leave any tools lying around. Always

dispose packaging material in such a way that it may not cause

any danger. There is always a risk of suffocation if children play

with plastic bags!

■The fastening material required for each assembly step is shown

in the diagram inset. Use the fastening material exactly as

instructed. The required tools are supplied with the equipment.

■Bolt all the parts together loosely at first, and check that they

have been assembled correctly. Then use spanner to finally tigh-

ten screws/nuts

■Please keep original packaging of this article, so that it may be

used for transport at a later date, if necessary. Goods may only

be returned after prior arrangement and in (internal) packaging,

which is safe for transportation, in the original box if possible.

It is important to provide a detailed defect description / dama-

ge report!

■For technical reasons, we reserve the right to carry out prelimi-

nary assembly work (e.g. addition of tubing plugs).

Belt adjustment (picture 6):

Adjust the belt while running it at a speed of about 6 km/h (if

necessary, less). No person must be on the belt while adjusting

it!

If the belt moves to the right, carefully turn the right adjusting

screw clockwise by max. a quarter of a rotation with the enclo-

sed socket spanner. Operate the belt and check the course of the

belt. Repeat this process until the belt runs straight away.

If the belt moves to the left, carefully turn the right adjusting screw

counter-clockwise by max. a quarter of a rotation with the

enclosed socket spanner. Operate the belt and check the course

of the belt. Repeat this process until the belt runs straight away.

Belt straightening:

Turn the adjusting screw to the right by max. one turn. Repeat

this process on the other side. Check as to whether the conti-

nuous belt slips. If this is the case, repeat the described process

once again.

Be very careful when adjusting and straightening the belt. An

extreme over- or under-tension may damage the running belt!

KETTLER GB Ltd.

Kettler House, Merse Road

North Moons Moat

Redditch, Worcestershire B98 9HL

+44 1527 591901 +44 1527 62423

www.kettler.co.uk Mail: sales@kettler.co.uk

KETTLER International Inc.

1355 London Bridge Road +1 888 253 8853

Virginia Beach, VA 23453 +1 888 222 9333

www.kettlerusa.com

USA



Care and Maintenance

■Do not use corrosive or abrasive materials to clean the equip-

ment. Ensure that such materials are not allowed to pollute the

environment.

■The electrical elements and components do not require special

maintenance. No alterations or repairs (except mantainance

checks) should be made to these parts unless by a qualified

electrician.

■When ordering spare parts, always state the full item number,

spare-part number, the quantity required and the serial number

of the product.

Example order: Art. no. 07883-600 / spare-part no. 68006922/

1 pieces / serial no......

Important: spare part prices do not include fastening material; if

fastening material (bolts, nuts, washers etc.) is required, this

schould be clearly stated on the order by adding the words „with

fastening material“.

Waste Disposal

KETTLER products are recyclable. At the end of its use-

ful life please dispose of this article correctly and safe-

ly (local refuse sites).

DE 60229750

■In case of a regular use of the running belt, the cold running belt

has to be serviced with silicone oil.

■Depending on the degree of use and load to which the unit is

subjected, the belt may tend to stretch or slip. Tighten the belt as

described. Adjust the tightness of the belt as described in section

„handling“.

■Observe the movement of the edge of the belt when it is in use. If

it tends to run towards the side, readjust it accordingly.

Running Tip: Running straight on the treadmill is made easier by

focussing on a ﬁxed object in front of you in the

room. Run as if you wanted to approach the object.

Importantly: Please keep the safety key in a safe place and ensu-

re that it is kept out of reach of children!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kettler Run 11 - 07886-500 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kettler Run 11 - 07886-500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info