Bedienungsanleitung Kettler Run S - 07885-700 (Seite 4 von 36) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

736644

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Assembly Instructions

For Your Safety

■The running belt should be used only for its intended purpose,

i.e. for physical exercise (walking and jogging) by one (1) adult

persons.

■RISK! Heart rate monitoring systems may be inaccurate. Over

exercise may result in serious injury or death. If you feel faint

stop exercising immediately.

■The running belt is not suitable for commercial use

■Any other use of the equipment is prohibited and may be dan-

gerous. The manufacturer cannot be held liable for damage or

injury caused by improper use of the equipment.

■Damaged components may endanger your safety or reduce the

lifetime of the equipment. For this reason, worn or damaged

parts should be replaced immediately and the equipment taken

out of use until this has been done. Use only original KETTLER

spare parts.

■The running belt has been designed in accordance with the

latest standards of safety. Incorrect repairs and structural modi-

fications (e.g. removal or replacement of original parts) may

endanger the safety of the user.

■The training machine must be positioned on a horizontal, stable

surface. Place suitable cushioning material underneath it for

shock absorption and to stop if from slipping (rubber mats or

similar).

You must ensure that the connection line is not jammed and does

not pose a tripping hazard.

■Always ensure that the space under the running belt is kept free,

i.e. that there are no objects, pets etc. beneath it.

■Never touch the moving belt with your hands. Also ensure that

there are no objects close to the belt or the rollers which could

be pulled into it thus causing injury or damaging the unit itself.

■The running belt is not suitable for use by persons weighing

over 135 kg.

■The unit should be positioned in such a way that there is a space

of 100 cm on both sides and 200 cm behind it.

■The treadmill is a training device driven by a motor and requi-

res special safety instructions and knowledge when being used.

Persons with limited physical, sensory or mental skills and child-

ren have to be instructed upon the correct use of the device and

must never use the device without supervision.

■The continuous sound level of the device is 72 dB at maximum

speed. Noise emission under load ist higher rhan without load.

■The mains adapter requires a mains voltage of 230 V, 50 Hz.

It should be connected only to grounded safety socket with a

single 16-A fuse. Do not under any circumstances carry out elec-

trical repairs or alterations yourself. Always ensure that such

work is done by a properly qualified electrician.

■Do not use any multiple sockets for connection purposes! If using

an extension line, this must satisfy the VDE guidelines.

■If not being used for a longer period of time, remove the

device's mains adapter from the socket.

■You must remove the mains adapter when performing all repair,

maintenance and cleaning work.

■Repairs on the electrical components in the unit should be car-

ried out by qualified persons only.

■Always observe the general safety rules and precautions for

working with electrical equipment.

■All electric appliances emit electromagnetic radiation when in

operation. Please do not leave especially radiation-intensive

appliances (e.g. mobile telephones) directly next to the cockpit

or the electronic controlsystem as otherwise values displayed

might be distorted (e.g. pulse measurement). )

■Prior to training attach the cord of the running belt stop trip to

your clothing.

■The KETTLER treadmill has an emergency stop mechanism for

your safety. Before starting your workout, fasten the cord of the

safety key to your clothing. If the treadmill has been shut down

by removing the safety key, restart it by reinserting the key. An

automatic restart of the treadmill belt does not occur. Further

instructions concerning the handling of the safety cut-out can be

found in the operating instructions for the training computer.

■An unmonitored use of the treadmill by other people can be

prevented by removing the safety key and keeping it safely hid-

den.

■In case of an emergency, hold on tightly to the handrail with

both hands and leave the treadmill by means of the antislipping

surface of the lateral platform. Activate the emergency stop

mechanism (safety cut-out).

■Any interference with parts of the product that are not described

within the manual may cause damage, or endanger the person

using this machine. Extensive repairs must only be carried out by

KETTLER service staff or qualified personnel trained by KETTLER.

■To ensure that the safety level is kept to the highest possible stan-

dard, determined by its construction, this product should be

serviced regulary (once a year) by specialist retailers.

■Should you be in any doubt, please consult your dealer.

Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain infor-

mation which is important for your safety as well as for the use and maintenance of the appliance. Keep these instruc-

tions in a safe place for reference purposes, maintenance work and to assist you when ordering spare parts.

Handling the equipment

Standards: This training machine is in accordance with DIN EN

ISO 20957-1class SB and DIN EN 957-6 class SB.

It is therefore unsuitable for therapeutic use.

■Before using the equipment for exercise, check carefully to ensu-

re that it has been correctly assembled and checked.

■Usage of the equipment in damp rooms is not permitted. Please

ensure that no part of the machine comes in contact with liquids

(drinks, perspiration etc.). This may cause corrosion.

■Always wear suitable shoes (running shoes) when using the run-

ning belt.

■Before beginning your first training session, familiarize yourself

thoroughly with all the functions and settings of the unit.

■If the equipment is in regular use, check all its components

thoroughly at appropriate intervals. Pay particular attention to

the tightness of bolts and nuts.

All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant process of quality control during manufacturing. The knowledge

gained in this process is used to constantly improve and develop our products. In order to offer our customers the very best in product quality, we reserve the right to make

technical changes at any time. In spite of this, should you have any cause for complaint, please contact your KETTLER dealer.

Kettler Run S - 07885-700 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kettler Run S - 07885-700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info