508841
4
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
4
iK350STEREOSYSTEM
STBY DOCK
AUX
B
ASSTREB
USING THE SYSTEM MENU ROTARY CONTROL
The iK350 Stereo System’s rotary control provides an intuitive user interface. The System Menu options listed on the
LED display below are available for adjustment by the rotary control. The rotary control knob is used as a push-button to
power on the iK350 and to scroll through the menus available on the LED display. Turning the rotary control knob allows
you to adjust the parameters of the selected menu.
iK350 System Menu
Tap the rotary control knob
to scroll through menu
selections. Tap and hold to
turn the unit off.
Turn the rotary control to adjust
the System Menu parameters.
After plugging the power supply into the DC input on the back of the iK350, the unit will be in “Standby” mode, as
displayed by the LED display on the System Menu. Turn the power on by pushing the rotary control button once. When
the power is on, the “DOCK” LED will be illuminated on the System Menu.
Volume: By default, the iK350 will be in volume control mode. Turn the rotary knob to adjust the volume up or down.
The rotary control will automatically revert to volume control mode after a short time period if any other menus have been
selected.
To scroll through the other menus, simply use the rotary control as a push-button. Each single button push will take you
from one menu to the next, rotating through TREB>BASS>DOCK/AUX and back to the volume control.
Treble: To adjust the treble on the iK350, use the rotary control as a push-button to scroll through the menus until the
“TREB” menu is displayed on the LED display. Turn the rotary control knob clockwise to increase treble and counter-
clockwise to reduce treble.
Bass: To adjust the bass level on the iK350, use the rotary control as a push-button to scroll through the menus
until the “BASS” menu is displayed on the LED display. Turn the rotary control knob clockwise to increase bass and
counterclockwise to reduce bass.
Input Source (DOCK/AUX): To enable the auxiliary input on the iK350, an external device must be plugged into the
1/8” stereo auxiliary input on the back of the unit. Use the rotary control as a push-button to scroll through the menus
until your current input source (DOCK/AUX) is fl ashing. Turn the rotary control clockwise and counter-clockwise to switch
between AUX and DOCK input. You may also enable auxiliary input by using the Mode button on your remote control to
cycle through menus, then pressing the up/down arrows to select your input source.
Standby: In “Standby” mode, the iK350 will be powered down, but your docked iPod will continue to charge as long as
a power source is plugged into the DC input on the back of the iK350. To enter standby mode simply press and hold the
rotary control button until the unit turns off and “STBY” is illuminated.
Figure 4
2009 iK350 Multilingual g01.indd 42009 iK350 Multilingual g01.indd 4 9/3/2009 3:48:25 PM9/3/2009 3:48:25 PM
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kicker iK 350 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info