7
KX Amplifiers
Installation
USING THE SIGNAL OUTPUT JACKS (PAST)
The Output (Pre Amp Signal Transfer) RCA jacks allow you to
send the incoming signal from one Kicker KX series amplifier to
another amplifier or processor without the need for Y cables. The
signal from the PAST jacks is identical to the signal fed to the
amplifier via its RCA input jacks or the High Level inputs and is
not affected by the amplifier’s built in crossover.
Most head units with high voltage outputs should be capable of
driving up to ten amplifiers in a chain.
REMOTE BASS LEVEL CONTROL
When using the Remote Bass Level Control you have the
ability to control the level of the subs from the driver’s seat. To
mount the controller simply screw the metal bracket to the
chosen location, then slide the housing onto the bracket until it
snaps into place. Run the cable from the controller to the
appropriate jack on the amplifier chassis.
When using more than one KX.1 amplifiers you have the ability
to control all of them from one Remote Bass Level Control. The
adapter is a common Modular Phone Splitter found at Radio
Shack and is installed between the controller and the amplifier.
