167667
15
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
29
SX .4 Series Amplifiers
Operation
UNLOCK AMPLIFIER - cont.
If you enter the wrong code the display will flash the mes-
sage
BAD CODE and return you to the UNLOCK screen.
Press the
ENT key to enter your
lock your code again.
Enter your code again making sure to place the correct
character in the correct position in the display. Blank spaces
count as part of the code so be sure you are entering it
correctly.
Press the
HOME key and try again. If you have found your
error then the amp will unlock. If not, the flashing
BAD CODE
will greet you and you can try again.
If you have tried several times (several is defined as more
than 3...less than 10) and you still can not unlock your
amplifier, this more than likely means means you have
forgotten your lock code.
You will need to call KICKER directly at (405) 624-8583 to
handle this situation. You will need your amplifier’s serial
number AND your receipt as the guys and gals answering the
phone will need this information from you to help you out.
So...before you call, gather this information up and have it
ready to save us some time on the phone. Cool? Cool!
Better yet, take the time
RIGHT NOW
to fill out the first page
in this manual and
STAPLE
your receipt to it. That way if or
when you need service (like forgetting your lock code) you will
have all the information you need right there in front of you.
SYS
MEM-1
GAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFT RIGHT
bad code
SYS
MEM-1
GAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFT RIGHT
unlock
HOME
ENT
ESC
28
SX .4 Series Amplifiers
Operation
Security MENU - Here you can lock down your amplifier to
prevent any access to the settings. The DEFAULT screen is still
active and you can select any of the four presets... but that is
it!
Use the
UP and DOWN keys to
select
LOCK IT UP or DON’T LOCK
and then press the ENT key to
accept your setting.
If you selected
LOCK IT UP the display will now show
UNLOCK. The controls are now locked out.Press the ESC
key to return to the DEFAULT scrolling screen.
If you selected
DON’T LOCK then you will return to the
MAIN menu and the amplifier will remain unlocked.
NOTE...
While your amplifier is in lock down you will notice the
LOCK
indicator on the ISIS VFD display is lit. This indicates your
amplifier is locked down and will require a code to unlock it
before any adjustments can be made.
HOME
ENT
ESC
UNLOCK AMPLIFIER
You do remember your lock code right? You better because
that is now the only way in! If you have not changed it then it
is still at the factory default of
123.
To unlock your amplifier press the
ENT key. The display will show
UNLOCK. Press the ENT key again.
You will now enter your code to
unlock the amplifier.
The
ESC and ENT keys move the
blinking cursor left or right to select
which character to enter.
Use the
UP and DOWN keys to
enter the character.
(
A, B, C...1, 2, 3...etc)
When you are finished press and hold
the
HOME key for 1.5 seconds to
enter your unlock code.
If the code is correct the amp will unlock and drop you back
into the MAIN menu. If not, then read on...
HOME
ENT
ESC
HOME
ENT
ESC
HOME
ENT
ESC
HOME
ENT
ESC
2 Times
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kicker sx 700 4 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info