483672
4
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
4
A
TECHNICAL DATA
Operating pressure 3-6 bar
Max. operating pressure 8 bar
Air consumption approx. 85-14 l/min.
Length blow-out tube 216 mm
Weight 169 g
Air connection R ¼”
USAGE INSTRUCTIONS
Intended Use
The air blow gun is intended for cleaning and blowing out material from objects and dicult to access
places.
“Intended use” includes usage that follows the operating instructions.
Any use beyond these parameters (dierent media, applying force) or any changes (reconstruction, use of
accessories that are not original) can lead to serious risks and is regarded as use that is contrary to the inten-
ded purpose.
Before first Use
Unpack the air blow gun and check all parts for any damage in transit. Dispose of packaging materials or
store them out of reach of children. Plastic bags etc. may become a deadly toy for children.
Start-up
• Screw the blow out nozzle (1) onto the air outlet opening (2).
The air blow gun is equipped with an air quick coupling adaptor (4). For your own safety it is not recommen-
ded to use a permanent connection between the air blow gun and the air hose, but use the quick coupling
adaptor instead.
• Power up the compressed air generator.
Press the trigger (3) to start the delivery of air. The more you press the trigger, the higher the air output rate
will be.
• Release the trigger to stop the delivery of air.
• After work, disconnect the air tool from the compressed air supply.
MAINTENANCE AND CARE
Air Pressure and Air Volume
The air blow gun requires clean and oil-free air. Therefore do not use an oil-fog lubricator within the air sup-
ply system.
If possible, only use compressed air hoses for the air supply that have not been previously used with air tools
requiring an oil-fog lubrication system.
Operate the air blow gun with a pressure of 3 – 6 bar. When using higher pressure than the max. permitted
pressure of 8 bar, its usable life will be reduced drastically. Operate the air blow gun using a compressor with
an air suction capacity of at least 140 l/min. The ideal capacity is provided by compressors with a suction
capacity of 200 – 300 l/min.
Only use air hoses with an inner diameter of at least 9 mm. When setting up the air pressure, always keep in
mind that the pressure will decrease by approx. 0.6 bar when using a 10 m long hose with an inner diameter
of 9 mm.
Maintenance and Care
To ensure proper functionality and a long lifetime, diligent maintenance is essential.
Add a few drops of oil to the trigger pin seal at regular intervals. Apart from that, the air blow gun is mainte-
nance free.
Do not allow liquids to enter the air blow gun and never immerse it into liquids. Water in the compressed
air inlet can damage the machine. Therefore it is recommended to drain the air lines and the compressor
regularly! Also clean the air filters at regular intervals.
For operating pneumatic tools, clean air is required. Corrosion residues, dust and dirt from the pneumatic
pipes reduce the eciency of the tool and will cause technical problems.
• If necessary, clean the air blow gun with a moist cloth.
• Do not use abrasive or aggressive chemicals as benzene or thinner, which may dissolve plastic parts.
29641 manual.indd 4 07-11-11 12:07
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kinzo 29641 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info