Bedienungsanleitung Kinzo 71799 (Seite 4 von 56) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

483664

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any

adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk

of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other

condition that may a ect the power tool’s operation. If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely

to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account

the working conditions and the work to be performed. Use of the power tool for operations diﬀ erent from

those intended could result in a hazardous situation.

5.5 Service

a) Have your power tool serviced by a quali ed repair person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

6 SPECIFIC SAFETY WARNINGS

• Hold tool by insulated grip surface when performing an operation where the cutting tool may contact hidden

wiring or its own cord. When in contact with a live wire, metallic parts of the tool will also become live and

may cause an electric shock to the operator.

• Do not start the tool with the blade touching any surface. The blade action will bounce the tool and may

cause body injury.

• Allow the tool to come to a complete stop before putting it down. A running tool will jerk when the blade tip

contacts any surface.

• Do not cut oversized work pieces

• Do not cut nails or screws unless you are using a blade speci cally designed for this purpose. Inspect your

material before cutting

• Before switching on the tool, be sure the blade in not contacting the work piece.

• Keep hands away from moving parts and on the top surface of the work piece. Do not place hands below

work surface while saw is operating.

7 ASSEMBLY

Disconnect the power plug before carrying out any adjustments or maintenance.

7.1 Installing the blade

• Unplug the power cord  rst.

• Rotate the Quick-release blade clamp (3) anticlockwise with hand.

• At the same time push blade (1) to the deepest position, then release the quick-release blade clamp. Make

sure it is securely fastened.

Before plugging in power cord, always pull on the blade to make sure it is securely locked in

the clamp. Failure to do so may result in serious injury.

71799 manual.indd 4 13-01-11 12:59

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kinzo 71799 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info