Bedienungsanleitung Kinzo 72179 (Seite 3 von 44) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

483684

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and o. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any

adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk

of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other

condition that may aect the power tools operation. If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account

the working conditions and the work to be performed. Use of the power tool for operations dierent from

those intended could result in a hazardous situation.

5 Service

a) Have your power tool serviced by a qualied repair person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

SPecial SafeTy PrecauTionS

• Donotuseforcuttingpipesorcables.

• Donotusecracked,bluntordamagedblades.

• Donotstartthesawifnobladeistted.

• Checktherearenoobstructionsin/onthesurfaceundertheitemtobecut.

• Donotattempttocutitemsthickerthanthemaximumcuttingdepthoftheblade,orwherethereisinsuf-

cient space for the blade under the item.

• Thesaw’smetalpartsmaybecomeconductiveifthesawcomesintocontactwithalivewire.Therefore

only hold the saw by its insulated handle.

• Checkthattheventilationslotsarenotblocked.

• Alwaysuseafacemaskifexcessiveamountsofdustaregeneratedorcuttingharmfulmaterials.

• Neverremovedust,obstructionsorthelikefromtheworkareawhilethebladeisoperating.

• Neverstopthesawbladebyapplyingpressuretothesawortothesideoftheblade.

• Donotliftthesawfromtheitembeingcutifthebladeisstillrunning.

• Neverplacethesawonatableorworkbenchifithasnotstoppedcompletely.

• Thesawbladewillcontinuetorunashorttimeafterthemachinehasbeenswitchedo.

• Donottouchthebladeormetallingsuntiltheyhavecooled.

• Holdpowertoolbyinsulatedgrippingsurfaces,whenperforminganoperationwherethecuttingaccesso-

ry may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed

metal parts of the power tool “live” and could give the operator an electric shock.

72179 manual 8 talen.indd 3 19-05-11 11:55

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kinzo 72179 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info