610929
14
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
14
TROUBLESHOOTING
IMPORTANT: The Blender will not operate at any speed unless the START/PAUSE button
is pressed first.
Understanding the Blender ash codes
LED is ashing slowly LED is ashing rapidly LED is not ashing
Ready mode
If the LED slowly glows with
increasing intensity and then
is off, the Blender is ready for
blending. Press START/PAUSE
button to start blending.
Error mode
IftheLEDasheson/offin
rapid bursts, the Blender is not
ready for blending.
The most common reasons
include :
-
Pitcher is not properly in place
- Pitcher was removed before
blending was completed
- Blender is jammed
First, rotate the knob to
OFF/O”. Next, make sure
the pitcher is properly in
place. Then, choose your
selection and press the
START/PAUSE button.
If Blender is jammed, it will
stop running to avoid damage
to the motor. Press START/
PAUSE, then unplug the power
cord. Remove the pitcher from
the base, and with a scraper,
free the blades by breaking
up or removing the contents
at the bottom of the pitcher.
To restart, rotate the knob to
OFF/O” position and then
rotate to knob selection and
press START/PAUSE.
IftheLEDdoesnotashaftera
setting is selected, the Blender
is not ready for blending.
The most common reasons
include:
- Blender is in “sleep mode”
-
Blender has been unplugged or
a power outage has occurred
The Blender may have gone
into an inactive mode or “sleep
mode.” This feature saves
power if the Blender is left
unattended for a few minutes.
Resetting the dial to “OFF/O”
brings the Blender back into
“active mode”. First, rotate the
knob to “OFF/O”. Next, make
sure the pitcher is properly
in place. Then, choose your
selection and press the START/
PAUSE button.
If the Blender still does not
work, see below for further
information on ways to correct
the operation error.
TROUBLESHOOTING
W10729916B_EN_v03.indd 14 3/20/15 3:13 PM
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für KitchenAid 5KSB5080A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von KitchenAid 5KSB5080A

KitchenAid 5KSB5080A Bedienungsanleitung - Deutsch - 16 seiten

KitchenAid 5KSB5080A Bedienungsanleitung - Alle Sprachen - 280 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info