670228
8
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
8
Cleaning And Maintenance
1. Always unplug the blender from the power source before cleaning.
2. Clean the machine and relative parts after use.
3. The outer case can be wiped with a damp cloth.
4. Cleanthejareverytimeafteruse.Donotuseabrasivesorstibrushestocleantheblender
base or blender jug as this will make them dull or scratch them.
5. Therewillbesomesedimentattachedtothebladesafteruse.Thiswillaectthebladessoplease
ensure they are cleaned for optimum performance.
6. Make sure the machine is clean and dry before you store it away.
7. Please unplug the machine when not in use for long periods of time and keep the machine away
from dust, insects and moisture.
8. DO NOT CLEAN THE BLENDER JUG AND LID IN A DISHWASHER.
Trouble Shooting
Problem Possible cause Solution
Blender fails to run No power connection Plug in correct power outlet
Motor overheat protector was
tripped
Allowmotortocooldownwithpowero
in cool spot
Increased vibration
and noise
The machine is not on a level
surface
Place the machine on a level surface
The blender jug has not been
placed on the base completely
Make sure the blender jug is placed
securely
Container is too full Decrease the ingredients
Leaking from lid Water or liquid is too high Decrease the water or liquid
Thelidisnotttedproperly Place the lid tightly on the blender jug
If the problem is still not resolved, please contact your local Distributor for maintenance.
Hints On Disposal
AccordingtotheEuropeanwasteregulation2002/96/ECthissymbolontheproduct
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correct-
ly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please
contact your local council or your household waste disposal service.
Declaratino Of Conformity
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
ThisproductisconformtothefollowingEuropeanDirectives:
2014/30/EU(EMC)
2014/35/EU(LVD)
2011/65/EU(RoHS)
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Klarstein Herakles 8G - 10027052 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info