466471
162
Zoom out
Zoom in
Vorherige Seite
1/162
Nächste Seite
July 25, 2002 21
7.4 Optional: Disabling Background Applications
Sometimes background applications, such as virus utilities, interfere with the software installation. To
prevent this from happening, shut down these applications before installing the software.
IMPORTANT: Disable the background applications only if you are having continued problems
installing or operating the Kodak software. You cannot disable the background
applications on WINDOWS 2000.
1. Select Start > Run, then type: msconfig in the Open field and click OK.
The System Configuration Utility appears.
2. Select Selective Startup and clear Load startup group items and click OK.
3. Click Yes to restart the computer.
When you complete the installation, re-enable the background applications. See 7.6 Re-enabling
Background Applications on page 21.
7.5 Installing the Software
If installing from the KODAK EASYSHARE Software CD, complete the steps below.
If installing from the Web, follow the instructions included with that software.
1. Load the KODAK EASYSHARE Software CD into the CD-ROM drive.
2. If the first install window does not appear, select Start > Run then type the drive letter that
contains the CD followed by:\setup.exe. For example D:\setup.exe.
3. Follow the on-screen instructions to complete the installation.
4. If you disabled the background applications, proceed to 7.6 Re-enabling Background
Applications on page 21. Otherwise, go to step 5.
5. If prompted, restart the computer.
Your Kodak software should be installed and ready for use.
7.6 Re-enabling Background Applications
If you ran msconfig to prevent the background applications from running, you must reset the settings
when installation is complete.
1. Select Start>Run..., then type msconfig in the Open field and click OK.
The System Configuration Utility appears.
2. Select Normal Startup, then click OK.
3. Click Yes to restart the computer.
Your Kodak software should be installed and ready for use.
162

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

kodak-dx-4330-easyshare

Suche zurücksetzen

  • Nach dem Einschalten der Kamera, bleibt Bildschirm dunkel. Mann sieht nur 2 senkrechte
    Klammern. Grüne Lampe am Sucher leuchtet dauernd. Wenn man ein Foto macht.
    kommt die Meldung, Versendet ,und ein Zeichen vom Papierkorb. Eingereicht am 21-5-2019 17:47

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kodak DX 4330 Easyshare wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kodak DX 4330 Easyshare

Kodak DX 4330 Easyshare Bedienungsanleitung - Holländisch - 134 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info