533080
3
Zoom out
Zoom in
Vorherige Seite
1/118
Nächste Seite
3
Chapter 2: Hardware Installation
2.1 How to Install the Router
Please use the supplied power adapter to power on the Router. IMPORTANT: Using a different power adapter
could cause damage and void the warranty for this product. Please connect the LAN port of the Router to the
network adapter of your computer with a cable. Please connect your broadband line provided by your ISP to
the WAN port. Insert the supplied CD-ROM into the CD-ROM drive, double click the “Setup” icon and follow
the instructions to complete the installation. Or you can enter the Routers Web page to configure it. (For more
details, please refer to Chapter 3.)
Chapter 3: How to Login to the Router
3.1 How to Set the Network Configurations
1. On your computer desktop, right-click “My Network Places” and select “Properties”.
2. Right-click “Local Area Network Connection” and select “Properties”.
3. Select “Internet Protocol (TCP/IP)” and click “Properties”.
4. - Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “OK” to
save the configurations.
- Or select “Use the following IP address” and enter the IP address, Subnet mask, and Default gateway as
follows: IP Address: 192.168.0.XXX: (XXX is a number from 2~254) Subnet Mask: 255.255.255.0.
Gateway: 192.168.0.1. You definitely need to input the DNS server address provided by your ISP.
Otherwise, you can use the Router’s default gateway as the DNS proxy server. Click “OK” to save the
configurations.
3.2 Login to the Router
1. To access the Router’s Web-based interface, launch a web browser such as Internet Explorer or Firefox
and enter the Router’s default IP address, http://192.168.0.1. Press “Enter”.
2. Input the “admin” in both User Name and Password. Click “OK”.
default setting
IP address 192.168.0.1
Password admin
SSID KONIG
Security Mode Disable
Wireless Mode b/g/n Mixd Mode
Channel Autoselect
Time Zone
WPS settings Enable
UPNP Device Name 11N Wireless Broadband Router
UPNP Manufacturer KONIGELECTRONIC
UPNP Model Name CMP-WNROUT41
UPNP Model Number V 1.0
UPNP reported network speed 300Mbps
UPNP Device address http://192.168.0.1
UPNP Disable
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Konig CMP-WNROUT41 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Konig CMP-WNROUT41

Konig CMP-WNROUT41 Installationsanweisung - Holländisch - 1 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info