570473
2
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
2
ENGLISH
2.5” HDD Enclosure
Hardware Installation
Open the box cover. Push the hard disk tightly into the socket. Connect the PCBA to the SATA HDD
and assemble the case. Then fasten the screws and close the cover. Connect the USB cable to the
USB port on your computer. The hardware installation is completed.
Partition and Format
A new HDD must be partitioned and formatted before it can be used.
Caution: Please be careful in selecting the HDD that must be partitioned and formatted. Once
the partitioning and formatting is done all files on the HDD will be erased.
XP/VISTA
Partition and Format
Please plug in the external HDD to the PC. Follow the following steps: “Start” “Setting”
“Administrative Tools” “Computer Management” “Disk Management” to find your new external
HDD. Right click on the HDD you want to use and select “Create Partition” to enter the Create Partition
Wizard. Follow the instructions and select quick format to partitioning and format at the same time.
Win 7/8
Please place the external HDD into the PC. Follow the following steps: right click on “Computer”
“Manage” “Disk Management” to find your new external HDD. Right click on the HDD you want to
use and select “Create Partition” to enter the Create Partition Wizard. Follow the instructions and
select quick format to partitioning and format at the same time.
LED Light
The LED will start flashing when it is connected to a PC. Make sure the PC is powered on.
Product Specifications
Interface: USB 2.0
USB Cable Length: 50 cm
Transfer Speed: max. 480 Mbps
Maintenance:
Clean the product only with a dry cloth.
Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
Disclaimer:
Designs and specifications are subject to change without prior notice. All logos, brands and product
names are trademarks or registered trademarks of their respective holders and are hereby recognised
as such.
Disposal:
This product is designated for separate collection at an appropriate collection point. Do not
dispose of this product with household waste.
For more information, contact the retailer or the local authority responsible for waste
management.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Konig Electronic CMP-MOBSTOR13 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info