4
RADIO RECEPTION
1. Set the FUNCTION SELECTOR to FM ST..
2. Turn the TUNING CONTROL to search for the desired station.
NOTE: The FM stereo indicator comes on if you have tuned the FM ST. to an FM stereo station.
3. Adjust VOLUME CONTROL for the desired volume level.
4. When you have finished listening to the FM ST., position the FUNCTION SELECTOR to OFF to
turn the unit off.
Helpful hints:
To improve radio reception
• To listen to the FM radio, extend the telescopic antenna and position it for optimum reception.
Reduce the length of the antenna if the signal is too strong (for example, if you are very near to a
transmitter).
• As the unit is equipped with a built-in antenna, the telescopic antenna does not have to be used to
listen to AM stations. Move the entire unit to position the built-in antenna.
STEREO HEADPHONE JACK
Plug stereo headphones (not included), equipped with a 3.5mm mini-plug, into the PHONES jack for
private listening, without disturbing people around you.
Reduce the VOLUME to a low level before putting the headphones on. You can then adjust the
VOLUME progressively to a comfortable level.
CD PLAYBACK
The CD player supports audio discs, CD-R and CD-RW. Do not attempt to use CD-ROM, CDi, VCDs,
DVDs or data CDs.
Note: Even if this portable radio/CD player is able to read CD-R and CD-RW discs, in addition to
conventional compact discs, it is not possible to offer a 100% guarantee that all CD-R/RW discs can be
read; playback depends on the quality and condition of the blank discs that you use. A playback failure
does not necessarily indicate that the radio/CD player is malfunctioning.
1. Position the FUNCTION SELECTOR on CD (the display unit briefly displays - - -)
2. To open the CD player door, raise it by the corner marked OPEN/CLOSE
3. Insert a CD, CD-R or CD-RW disc, printed surface facing upwards, and gently press the CD player
door to close it
4. Start playback by pressing PLAY/PAUSE
5. Press PLAY/PAUSE to interrupt or resume playback
6. To stop CD playback, press STOP
NOTE: CD playback stops automatically when the CD compartment is opened, the radio function
is selected or the CD is finished.
SELECTING A DIFFERENT TRACK
During playback, press NEXT or BACK on the radio/CD player or remote control to select a track.
If you have selected a track number in Stop or Pause mode, press PLAY/PAUSE to resume playback.
Briefly press NEXT to move to the next track or press NEXT several times until the desired track
number appears in the display.
Briefly press BACK to return to the start of the current track.
Press BACK several times to find a previous track.
SEARCHING FOR A SPECIFIC SECTION OF A TRACK
1. Press and hold BACK or NEXT to read the track in fast forward mode at reduced volume
2. When you have found the desired section, release the BACK or NEXT button (normal playback
resumes automatically)
REPEAT
Repeat: repeat the current track.
Repeat all: repeat the entire CD.
