508613
4
Zoom out
Zoom in
Vorherige Seite
1/83
Nächste Seite
4
To prevent sound from skipping (Anti-Skip System)
The ESP (electronic shockproof protection) system applies semiconductor memory to prevent aborting
while playing when the machine is subjected to external force.
That means the ESP function is already turned on.
The ESP function CD/MP3 is automatically activated whenever the player is used for playing CD/MP3
discs.
- CD ESP time is about 2 seconds.
- MP3 ESP time is about 5 seconds.
Note:
When using the ANTISHOCK functions, the battery power consumption increases because the disc
rotates faster than normal and the dynamic memory is active.
While the ANTISHOCK function provides continuous sound output when the unit is subjected to shock
or vibration, it will not correct errors arising from the use of defective, scratched or dirty discs.
BASIC FUNCTION
Switching power on/off: Save energy whether you are using mains or battery supply, to avoid
unnecessary energy consumption always put off the source selector.
General operation
1. To select your sound source, adjust the source selector to MP3/CD/OFF/RADIO.
2. Adjust the sound using VOLUME.
3. To switch off the set, adjust the source selector to the off position.
RADIO
Radio reception
1. Slide the FUNCTION selector to RADIO.
2. Slide the BAND selector to the desired setting -FM STEREO, FM, AM.
3. Rotate the TUNING control to find the desired stations.
NOTE: If the BAND selector is set to the FM stereo station, the FM stereo LED indicator will
illuminate.
4. When you have finished listening, slide the FUNCTION selector to the other position to shut the
power off.
- For FM, pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the
signal is too strong (very close to a transmitter).
- For AM, the set is provided with a built-in antenna so the telescopic antenna needs not be
adjusted.
Earphone output
Plug in a 3.5 mm earphone plug into the earphone output on the front panel of the unit for private use.
The speakers will be automatically disconnected when you use the earphone output.
PROGRAMMING METHOD
(1) Press the [PROGRAM] key at STOP mode, the system will go to PROGRAM mode.
- The PRG icon and P01 will blink at 2 Hz. This prompts the user to enter the first songs in the
program PLAY list.
(2) The user can select the desired tracks by using the [NEXT] [+10 Track], [BACK] [-10 Track] keys.
Once these keys are pressed, the display will show the selected track.
(3) After selecting the desired track, press the [PROGRAM] key again and it will be stored in the
memory. A maximum of 99 tracks can be programmed when steps (2) to (3) are repeated.
(4) If the [STOP] key is pressed during program mode, the selected tracks will be stored in the memory
and will return to STOP mode (continuous play mode)
(5) If the [PLAY] key is pressed during program mode, it will start the program PLAY mode. PLAY starts
from P01 Track.
Erasing a Program
You can erase the contents of the memory: Press the STOP button 2 times.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Konig Electronic HAV-PRCD21 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info