570416
2
Zoom out
Zoom in
Vorherige Seite
1/51
Nächste Seite
2
ENGLISH
Advice for use and care:
Ensure the scale is on a at, even and rm surface. Avoid carpet or soft surfaces. Always
weigh yourself with the same scale placed on the same surface. Uneven oors may aect the
reading.
The surface of the scale will be slippery if wet. Keep it dry!
Weigh yourself without clothing and footwear, before meals and always at the same time
of day. Keep the scale in a dry place to protect the electronic components. Clean after
use with a lightly damp cloth, do not use solvents or immerse the product in water. Avoid
overloading the scale, otherwise, permanent damage may occur. A user who has any metal
material inserted into his/her body may get dierences in measurement of body fat reading.
Pacemaker users are advised against using this device.
The scale is designed for household use only, not to be used for commercial purposes.
Operating instructions:
1. Put the scale on a hard at surface (avoiding carpets or any soft surfaces).
2. Switch on the scale by a slight tap on the glass platform near the LCD display. Then wait a
few seconds, the following will appear: 0.0 kg.
Note: The scale will not work properly if you step on the scale before it shows 0.0. If this
happens please start from the beginning of step 2.
3. Gently step on the scale. Parallel your feet on the scale without moving and wait whilst
the scale computer weighs.
When you step o the scale, it will automatically switch o. (If no weighing is carried out
while the zero is being displayed, the scale will automatically switch themselves o after
approximately 6 seconds).
When the scale is overloaded (over 180 kg/396 lb), the following will appear on the screen: Err.
When the battery needs replacement, the following will appear on the screen: LO.
Specications:
• Equipped with a high precision “strain-gauge” sensor.
• Capacity: 180 kg/396 lb
• Graduation: 0.1 kg/0.2 lb/0.25 lb
• LCD display
• Foot-tap switch
• Automatic zero resetting
• Automatic switch o
• Overload indicator
• Low battery indicator
Lithium battery is included (CR2032). Please remove the insulation sheet from the battery
contacts before using.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Konig Electronic HC-PS100N wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info