570578
3
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
3
Back
1 Ethernet:
Connect this port to PC. When HDTV with HEC enable HEC function, PC will
be connected to Ethernet.
2 Audio Port:
Connect the three ports to Amplifier Receiver
When select ARC ON, audio output is from HDTV with ARC.
When select ARC OFF, audio output is from Source devices.
3 HDMI Output: Connect this port to HDTV
4-7 HDMI Input: Connect these ports to source devices
8 DC/5V: Connect this port to Power Supply
9 Power Switch: Turn on or off the power
10 Power LED:
When the switching is working, LED turns blue; When it is standby, LED
turns red
11 IR: Receive the signal from Infrared Remote Control
12-15 Input LED: LED will turn on when input port is selected
16 2CH/5.1CH LED
LED will turn on when 5.1CH button is pressed;
LED will turn off when 2CH button is pressed.
17 Select: Press this button to select 4 inputs circularly.
18 ARC:
ON/OFF LED
LED will turn on when ARC ON button is pressed, then this product will
enable ARC function, and audio signal will be from HDTV; LED will turn off
when ARC OFF button is pressed, then ARC function will be turned off, and
audio signal will be from source devices.
19 Select: Press this button to select ARC on or off.
CONNECTION AND OPERATION:
CONNECTION
1. Connect HDMI input of the product to source devices. (Input cables are optional)
2. Connect HDMI output of the product to HDTV.
3. Connect audio port to Amplifier Receiver.
4. Connect Ethernet port to PC
5. Insert the DC side of 5V power supply into the unit and then connect the AC side of the power supply
into the wall outlet.
6. Turn on the power.
OPERATION
1. Source Select
Press “Select” button or remote control to switch Input sources from Input1 to Input4 manually.
2. 2CH/5.1CH Audio Output Select
Note: Only when the source supports 5.1CH output (including CD), this function is effective and it
realizes through the 2.1CH and 5.1CH buttons on the remote control. Press “2CH” button, the
product outputs 2CH audio and the LED turns off; press “5.1CH” button, the product outputs 5.1CH
audio and the LED turns on. When provided with power, it automatically selects 5.1CH audio output.
If the source can only supports 2CH audio output, the “5.1CH” button will become invalid, that is,
although you press “5.1CH” button, the product still outputs 2CH audio and the LED is still on.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Konig Electronic KN-HDMISW25 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info