Instruction Manual
ENGLISH
21
Ice Crush Function
Put the ice cubes into the mixing unit (3) (not more than 8
pieces) and fit the lid (2) incl. the measuring cup (1) again.
Switch to P-Position (Pulse Switch) for a few seconds and then
to 0-Position (Off) again. As soon as the ice cubes are at the
bottom of the glass jug, you can switch again to P-Position.
Repeat this process until you have the desired consistency of
the ice
Attention: Only feed the mixing unit (3) with ice cubes whilst
the motor block is switched off, secure the lid and
switch the appliance on.
Speed setting Use
1 (Low) for light usage with liquids (e.g. Instant
drinks, cocktails, milkshakes, etc.)
2 (High) for more solid consistency – for mixing
liquids and solid foods(sauces,babyfood,
puree, etc.)
P (Pulse setting) for ice crushing & short, powerful
impulse movements
Warning: DO NOT operate the appliance longer than 2
minutes (CO-time) at a time. After a 2 minute use, the blender
should be allowed to cool down for 10 minutes. This can be
repeated 3 times, before the appliance has to be switched off
for a 30 minutes cooling down period, to avoid overheating of
the appliance.
Cleaning and Care
Before cleaning, always switch off (O-Position) the
appliance and disconnect it from the mains. Let it completely
cool down. Never immerse the motor block (5) in water.
Danger! Electric Shock!
Clean the appliance as soon as possible after use with a damp
cloth and do not use any aggressive cleaning agents.
