620514
36
Zoom out
Zoom in
Vorherige Seite
1/37
Nächste Seite
36
Lower the unit head and grind the tooth slowly.
Release the chain and get ahead two teeth further using the stop (differ between the right and the left teeth, all the teeth on a
side should be sharpened at first)
Repeat the steps so that each teeth is sharpened (to work the teeth on the opposite side, the sharpener head has to be set at
the equal angle on the opposite side; see also Fig. 4)
Störungen - Ursachen - Behebung
Unplug before performing any work on the unit power cord from the socket.
Trouble Cause Troubleshooting
The grinding spot is
burnt
1. The grinding disc is blunt 1. Align the disc.
The sharpening angle
does not fit
1. The grinding disc is worn 1. Replace the disc.
Inspections and Maintenance Safety Instructions
The machine will serve as a sufficient aid only if maintained and care for appropriately. Insufficient maintenance and care may result
in accidents and injuries.
The disc is not allowed to be fitted on the head with force.
The grinding disc bored centre hole diameter shall not be altered.
Only grinding discs fit for the unit are allowed for the use.
Any works in the unit should be done with the unit switched off.
Inspections and Maintenance
Fig. 10
Take steps as shown to replace the grinding disc .
Take the cover off
Loosen the disc locking screw
Take the disc out.
Take the steps in reverse order to fit the grinding disc in
Use only the disc fitted for the use in this unit.
fig. 11
Only perfect grinding discs are allowed for use to prevent
injuries.
To check for hidden defects of the grinding disc, a sound test may be
performed.
To test the disc, pull a pencil through the hole so that the disc may
vibrate freely (see Fig. 11). Now, tap the disc edge with another
pencil. The sound of the disc should be high and clear. If the sound is
muffled or plonk, the disk is damaged and hot fit for use.
A muffled sound indicates fissures etc.
Inspections and Maintenance Schedule
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kraft GKS 108 - 05165 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info