44
TROUBLESHOOTING
1) No power.
• Check the plug socket, cable, line and plug, where appropriate, have
repaired through electrical specialist.
• Any of the parts are defective, such as On/Off switch /motor etc. (please
contact service agent).
2) The high pressure washer operates intermittently.
• Power cable is damaged.
• Internal loose electrical connection.
• On/Off switch defective(please contact service agent).
3) No or only little pressure is built up.
• Check if there is any air in the system, if so, please ventilate the machine!
Run the machine without the high-pressure hose connected until water
starts leaking without bubbles. Re-attach the high-pressure hose.
• Check all inlet pipes leading to the pump for leaks or clogs.
• Check the setting on the hand-held spray gun.
4) Great pressure varieties.
• Clean the high pressure jet nozzle
• Check the water inlet pressure.
5) Machine pulsating
• Check if there is any air in the hose or pump, allow machine to run with
open trigger until regular working pressure resumes.
• Check if there is inadequate supply of mains water, avoid using long, thin
hoses (min 1/2").
• Check if nozzle partially blocked or water lter blocked, clean the nozzle or
lter.
• Check if the hose kinked, straighten out hose.
6) Machine is leaking.
• Please contact the authorized agent.
RECYCLING AND DISPOSAL
1. The product is delivered in a packaging that protects it against damage during
shipping. Keep the packaging until you are sure that all parts have been
delivered and that the product is working properly. Recycle the packaging
afterwards.
2. The crossed-out wheeled bin symbol indicates that the product should
be disposed of separately from household waste. The product should be
disposed of to a designated location for recycling in accordance with local
environmental regulations. By separating a labeled product from household
waste, you help reduce the amount of waste sent to waste incinerators or
landlls, and minimize potential negative impacts on human health and the
environment.
