Bedienungsanleitung Krups Beertender B100 (Seite 5 von 21) (Englisch, Französisch, Spanisch)

611585

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

English

PRODUCT DESCRIPTION

BeerTender

components

1. BeerTender

at home draughting system

2. Refrigerating chamber

3. Lid

4. Lid opening handle

5. Control panel

6. Tap cover

7. Dispensing spout

8. Beer tap handle

9. Drip grate

10. Drip tray

11. Main power switch

12. Power cord with plug

Other Components

13. 5 Liter DraughtKeg

(not included)

14. Replaceable Draught Beer tube (Should be changed with each new

DraughtKeg

) (5 included with purchase)

BEFORE USE

CHILD SAFETY LOCK

n Make sure that children can not play with the appliance.

n Do not leave the materials used to pack the appliance within children’s

reach.

n To prevent children from using the appliance, you can remove the tap

handle. To remove the handle, make sure that it is in an upright position and

pull upward - ﬁg. 1.

FIRE PREVENTION

n In the event of a ﬁre, use carbon dioxide (CO2) extinguishers.

n Do not use water or powder extinguishers.

SETUP AND MAINTENANCE

n Install the BeerTender

in an upright position in a safe place.

To ensure that the BeerTender

works correctly and efﬁciently, the following

is strongly advised:

n Place it on a perfectly level and stable surface.

n Choose a clean, well-lit area with an easily accessible electric socket.

n Keep the appliance at a minimum distance (4 inches) from the stove as

shown in the diagram - ﬁg. 2.

n Keep the appliance at a minimum distance (2 ½ inches) from the walls.

n Store the DraughtKeg

at room temperature or in the refrigerator.

n Make sure the BeerTender

is not exposed to direct sunlight.

n Do not use the BeerTender

outdoors.

n Do not place the BeerTender

on very hot surfaces or near open ﬂames, as

these may melt or damage the casing.

n Your BeerTender

uses a technology that delivers ultimate cooling results

when the ambient temperature is between 54°F and 86°F. At colder

temperatures, the appliance cooling system could be damaged. At

warmer temperatures, the cooling system will not be able to reach the pre-

programmed temperature - ﬁg. 3.

WARNING! To avoid overheating, always keep the BeerTender

appliance

out of direct sunlight. To obtain good cooling performance, never install your

machine in a room with an ambient temperature above 86°F.

USING THE BEERTENDER

SYSTEM

n Always hold the appliance by the bottom edge when lifting - ﬁg. 4.

n To obtain draught beer of optimal quality you should keep two basic factors

in mind, the temperature of the beer and hygienic conditions. Follow these

few simple steps for the ideal use of BeerTender

A new draught beer tube should be used with each DraughtKeg

A bag of 5 tubes is included with the BeerTender

appliance. To order

additional beer tubes, please contact www.beertender.com or call

1-888-KRUPS.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Krups Beertender B100 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info