Bedienungsanleitung Krups KB 50 (Seite 7 von 42) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

690525

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

EnglishEnglish

DESCRIPTION

A Motor unit

B “

SMOOTHIES” button

C “

ICE CRUSH” button

D Control knob

E Blender jug assembly

e1 Blade unit

e2 Gasket seal

e3 Graduated blender jug

e4 Lid

e5 Measuring cap

F “

“ Stand By Mode

G “

“ Min Speed

H “

“ Max Speed

BEFORE THE FIRST USE

n Clean all the parts (E) with warm water and washing up liquid except for the motor unit (A) which must

never be immersed in water or placed under running water (see § Cleaning).

CAUTION: The blades are extremely sharp; handle them with caution when using or cleaning

the appliance.

n Make sure all the packaging has been removed before operating the appliance

n Important note: Turn the control knob (D) to

before placing the blender jug on the motor unit (A).

n The appliance will start only if the blender jug is positioned correctly on the motor unit.

n Do not operate the appliance if the lid is not in place.

ASSEMBLING AND FITTING THE JUG

n Fit the gasket seal (e2) on the blade unit (e1) (Fig.1).

n Place the assembly (e1+e2) on the base of the jug (e3). Lock it by rotating the blade unit through a

quarter turn in an anticlockwise direction (Fig.2).

n Introduce the ingredients to the assembled jug.

n Place the lid (e4) on the jug. Place the measuring cup (e5) in its slot on the lid.

n Place the blender jug assembly (E) on the motor unit (A). The blender jug can be placed in two positions:

jug handle to the right or the left of the motor unit (Fig. 3).

USING YOUR APPLIANCE FOR THE FIRST TIME

n Once the blender jug is positioned correctly on the motor unit, plug in the appliance and turn it on using

the desired function.

n Speed selection: Turn the control knob (D) to choose the desired speed; the speed increases gradually

between mini “

” and max “ ”. You can change this speed as required during preparation.

n “Pulse” function: Turn the control knob (D) to the “Pulse” position. Using a succession of pulses gives

finer control over the degree of blending for precise preparations. In this position, the appliance starts

directly on maximum speed. It stops as soon as you release the knob.

n Function “

SMOOTHIES”

This function is used to prepare smooth milkshakes and fruit cocktails. The speed is pre-programmed for

best results. To use this function, turn the control knob to

, and press the “SMOOTHIES” button (B)

to start the appliance. To stop it, press the “SMOOTHIES” button (B) again.

CAUTION: the safety precautions are part of the appliance. Read them carefully before using

your new appliance for the first time. Keep them in a place where you can find and refer to

them later on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Krups KB 50 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info