Bedienungsanleitung Kyocera CONTAX U4R (Seite 8 von 198) (Englisch)

512519

Zoom out

Zoom in

Vorherige Seite

1/198

Nächste Seite

Introduction Getting Ready

Taking Pictures

Playback Set Up

EN-8

NEXTBACK

Contents Glossary Index Nomenclature Menus and Settings Troubleshooting

• This camera is not designed to be waterproof, and cannot be used in the rain or under water. If the camera

should inadvertently be exposed to water, it should be taken quickly to a Contax Service Center for

inspection.

• Take great care to keep the photography lens and other parts clean since soiling such as fingerprints can

affect the accuracy of the camera's metering and focusing functions. If these areas become soiled and

require cleaning, wipe them gently with the supplied cleaner or a third-party lens cleaning cloth. Any dust or

debris should be removed using a blower or lens brush.

• Clean the camera body by wiping with soft cloth. Never use benzene, thinner, or other volatile solvents or

cleansers, since such substances will damage the body materials.

• Do not remove the SD memory card or Multi-Media Card (MMC) while the card access LED is flashing.

• Interference may occur in recorded or played back images when the camera is used in areas subject to

strong electromagnetic interference (e.g., near a television set or stereo speakers).

• Do not direct the camera lens directly toward the sun when shooting, since the CCD element may be

damaged.

• If the camera is dropped, it may be damaged internally or parts may have been dislodged even when there is

no visible external damage. The camera must be taken to a Contax Service Center for checking.

• Do not attempt to touch the insides of the memory card slot, since damage or malfunction may result.

CAUTION

• Clean the camera well after using it at the beach or other locations subject to

large concentrations of sand or dust. Salt air may promote corrosion of metal

components and damage or short circuits in electronic parts, causing the

camera to emit smoke or catch fire. Sand inside the camera may result in

internal damage and operating malfunctions.

• If the camera is brought quickly from a cold place to a warm room,

condensation may form on the lens and internal parts. Such condensation

may result in damage or short circuits in electronic parts, causing the camera

to emit smoke or catch fire. Whenever possible, avoid subjecting the camera

to sudden changes in temperature.

• This camera is a precision electronic instrument, and should be protected

from impacts and falls that might cause damage to internal parts or the

shorting of circuitry.

• This camera is an electronic device which uses a high-performance IC. The

heat emitted from the IC may make the camera hot during use. It is not a

failure.

• When taking the camera overseas or using it to record important events,

check its operating condition and take test pictures beforehand to

confirm proper operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera CONTAX U4R Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info