Bedienungsanleitung La Crosse WS8005 (Seite 1 von 2) (Englisch)

680756

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

WS 8005 Manual

Technical data:



DCF-77

Radio controlled Clock

 Time in 12/24 hour format

 Manual time setting option

 Time Zone setting: -12/+12h

 Continuous calendar up to year 2054

 Date and weekday display

 Temperature display in °C or °F

 Weekday display in seven languages: English, German, Italian, French,

Danish, Dutch, Spanish

 Alarm with Snooze function

 Thermometer: Indoor measurement ranges: -9.9°C ~ 5 9.9°C

 Battery: 1.5V “AA” size x 2pcs (not included)

Important information:

 When you insert the batteries all the symbols on the display will briefly light up and you will hear a signal tone, LCD

full display for 2 seconds with beeping, then enter RCC reception for seven minutes.

 If this automatic setting process is unsuccessful, then use a sharply pointed instrument to press the Reset button on

the rear side of the clock.

Manual time setting:

 Press and hold down the “SET” button for 2 seconds, the 12/24 hour mode display starts to flash. Now use “▲” and

“▼ “buttons to set the correct 12/24 hour mode.

 Press “SET” to confirm your setting, the offset display starts to flash. Now use “▲” and “▼“buttons to set the correct

time zone.

 Press “SET” to confirm your setting, the Hour display starts to flash. Now use “▲” and “▼“buttons to set the correct

hour.





 Press “SET” to confirm your setting, the Minute displays starts to flash. Now use “▲” and “▼“buttons to set the

correct minute.





 Press “SET” to confirm your setting, the Year display 2004 starts to flash. Now use “▲” and “▼” buttons to set the

correct year.

 Press SET to confirm your setting, the Month display starts to flash. Now use “▲” and “▼” buttons to set the correct

month.

 Press “SET” to confirm your setting, the Date display starts to flash. Now use “▲” and “▼“ buttons to set the correct

date.

 Press “SET” to confirm your setting, the language selection for the Weekday displays starts to flash. Now use “▲”

and “▼“ buttons to select a language.

 Press “SET” to confirm your setting and to end the setting procedures, enter the clock mode.

Info:



After 30 seconds without pressing any button, the clock switches automatically from set mode to normal time mode.

Setting the daily alarms:

To view the set alarm times, under the clock mode, press once ALARM button, LCD displays the “

” icon.

 Press and hold down the ALARM button for 2 seconds until Alarm Time flashing icon is displayed. Now use the “▲”

and “▼“ buttons to select the alarm time you require and briefly press the ALARM button to set this Alarm time.

 The Hour display of the Alarm time starts to flash. Use the “▲” and “▼“buttons to set the required hour. Press

ALARM button to confirm your setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

La Crosse WS8005 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von La Crosse WS8005

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info