652460
3
Zoom out
Zoom in
Vorherige Seite
1/5
Nächste Seite
3
Installing the mobile app and pairing the tness band
The tness band is compatible with iOS (7.0 and higher) and Android
(4.3 and higher). Download the LinkFit mobile app to control the t-
ness band from the following link:
http://tech.lamax-electronics.com/
BFit/BFit-app-app-store
http://tech.lamax-electronics.com/
BFit/BFit-app-google-play
Enable Bluetooth on your smartphone. Turn on your Bt band.
When the band is not paired, it is in search mode and this icon .
appears next to the time display, above the battery status. Open the
LinkFit app on your smartphone. If your phone is not already paired
with the tness band, it will appear on the Device Scan page in the
app. Choose the band with your identication number and conrm
this pairing with your phone (Android – Conrm, iOS – Pair). The
identication number is displayed on the tness band screen when
it is turned on. Pairing should be complete within a minute. If after
a minute the pairing notication does not appear, repeat the abover
procedure. Once paired, this icon appears next to the time and abo-
ve the battery status. When paired the tness band can be seen in the
app Device Connected settings. After pairing the app will ask you to
enter your gender, weight, height and daily step target.
Data synchronization
The tness band automatically syncs with the app after pairing with
your smartphone via Bluetooth. The band displays the precise time
and synchronizes the pedometer data, calories burnt and distance
travelled. The initial data synchronization takes approximately one
or two minutes. Data can be synchronized manually in the app by
touching the icon . If data is not synchronized, turn Bluetooth o
and on again.
Sleep monitor
Scroll across the screen from left to right using your nger until you
reach this icon . Then touch and hold the display. The band then
briey vibrates and displays the exact time together with the icon
. Sleep monitoring is now enabled. Turn o sleep monitoring by
pressing and holding the display in this mode. The display will light
up, vibrate briey and the connection icon reappears next to the
time. Automatic sleep monitoring can also be enabled in the app. In
the settings turn on the Autosleep function. Sleep monitoring is now
automatically enabled between 8 pm and 9 am.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lamax B-Fit wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info