Bedienungsanleitung Lenco cr 334 (Seite 12 von 13) (Englisch)

455819

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

If you do not change the built-in lithium battery within a reasonable period of time after you see the

warning indicator, the lithium battery may become exhausted and will no longer be able to supply

back up power to the automatic time setting system

internal computer. If the unit is disconnected

from the AC outlet after the battery is exhausted, or if a power interruption occurs, the automatic

time setting

memory will be lost and the clock will need to be reset when the power is restored. Be

sure to install a fresh lithium

battery before you reset the clock; otherwise the clock will need to be reset each time the power is

interrupted.

If the lithium battery is exhausted and you experience an interruption in the AC power supply, the

clock will reset itself to its initial default setting when the power is restored.

The initial default setting is 12:00 AM, SATurday, January 1st (1.01), 2005.

If you notice that the time on your automatic time setting

clock radio is completely incorrect, and

the DAY OF WEEK indicator is also wrong, press the CALENDAR button. If the small displays are

showing “01.1” and “2005”, you probably experienced a total memory loss. To reset the clock after

a total memory loss, proceed as follows:

1.) Follow the instructions mentioned previously and install a new CR2430 or CR2450 lithium

battery in the battery compartment.

2.) Connect the radio to your AC outlet and let the clock set itself.

3.) Press the CALENDAR button. The ALARM displays will change to “Month/Date” and “Year”.

• While holding the CALENDAR and TIME buttons, press the SET < or > button to set the

ALARM 2 display to the correct year, and then release the buttons.

• While holding the CALENDAR button, press the SET < or > button to set the ALARM 1

display to the correct “Month” and “Date”. When the correct month and date appear on the

display, release the buttons.

• The DAY OF WEEK indicator will change automatically as you adjust the “Year”,

“Month/Date” settings.

4.) Press the TIME button and the SET < or > button to set the display to the correct time.

5.) After you set the time, reconfirm that the Day, and Month/Date displays are still correct. Make

final adjustments if necessary.

The automatic time setting

clock memory is now reset and the new lithium battery will maintain

it for the next 5 to 8 years, depending on the number and duration of the power outages you

experience.

IMPORTANT NOTE:

After resetting the clock, don’t forget to reset your wake up times, and alarm mode settings, and

sleep timer settings as well.

Lithium Battery Precautions

• Dispose of the old battery properly. Do not leave it lying around where a young child or pet could

play with, or swallow it. If the battery is swallowed, contact a physician immediately.

• Battery may explode or leak if mistreated. Do not attempt to recharge it or disassemble it. Do not

dispose of the old battery in a fire.

CARE AND MAINTENANCE

If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomes smudged or

dirty, clean it with a soft, slightly dampened cloth.

Never allow water or any liquid to get inside the cabinet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco cr 334 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lenco cr 334

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info