Bedienungsanleitung Lenco CS-322 (Seite 4 von 31) (Deutsch, Englisch, Holländisch, Französisch, Spanisch, Polnisch)

477311

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

OPERATION

1. POWER/MODE 13. 4/RDM

2. 8┃ 14 3/RPT

3. DISP/0 15. 2/INT

4. AMS 16. 1 /

5. VOL/SEL/ ENT 17. 9/

┃

┃┃

┃

6. LCD Display 18. BAND /PTY/7

REMOTE SENSOR

19. TA

8. (Release Button) 20. MUTE/AF

9. OPEN 21. USB

10. Auxiliary input 22. SD CARD SLOT

11. 6/DIR+ 23. Reset Button

12. 5/DIR-

GENERAL OPERATION

1. Switching on/off the unit

Press any button to turn on the unit. Long press “POWER” button to turn the unit off.

2. Remove the panel

Press button(8) to fold down and Remove the panel.

3. Sound adjusting

Press SEL button (5) shortly to select the desired adjustment mode. The adjustment mode will change in the

following order: VOL---BASS---TREBLE---BALANCE---FADER---LOUD---DSP OFF---DX---STEREO.

By rotating the audio knob (5) clockwise or counter-clockwise, it is possible to adjust the sound setting.

4. LOUDNESS on/off

In above menu. Keeping pressing SEL to enter LOUD setting. Then rotating VOL to turn it on/off.

5. SELECT EQ

In above menu. Keeping pressing SEL to enter DSP OFF setting. Then rotating VOL to select desired EQ function

as below: DSP OFF---CLASSIC---POP---ROCK

6. LOCAL/DISTANCE

In above menu. Keeping pressing SEL to enter DX setting. Then rotating VOL to select DX/LOC mode. In LOC

mode. During scanning. to reduce the sensitive of searcher and only receive the local stronger signals.

7. STEREO/MONO

In above menu. Keeping pressing SEL to enter STEREO setting. Then rotating VOL to select STEREO/MONO

mode. In STEREO mode. In stereo mode, when stereo broadcasting station is received, the “OO” icon will appear

upon the display.

8. LIQUID CRYSTAL DISPLAY

Exhibit current frequency and activated functions on the display.

9. AUXILIARY INPUT

The unit can be connected to a portable audio player through the AUX IN jack (10) on the front panel. After finishing

the connection, you can press MOD button (1) on the front panel to switch the mode to AUX IN mode.

10. RESET FUNCTION

RESET button (25) must be activated with either a ballpoint pen or thin metal object. The RESET button has to be

activated for the following reasons:

- Initial installation of the unit when all wiring is completed.

- All the function buttons do not operate.

- Error symbol on the display.

Note: if press RESET button, All the memory will be lost!

OPERATION

RADIO OPERATION

1. SWITCHING TO RADIO MODE

Keep pressing MOD button (1) shortly till the radio mode appears in the display.

2. SELECTING THE FREQUENCY BAND

In radio mode, press BANDbutton (18) shortly to select the desired band.

The reception band will change in the following order: FM1--FM2--FM3--AM1(MW1)--AM2(MW2).

3. SELECTING STATION

Press 9 ▎ button (17) or 8┃

┃┃

┃ button (2) shortly to

to activate automatic seek function. It will search the station

automatically. Press for several seconds until “MANUAL” appears on the display, the manual tuning mode is

selected. Every time 9 ▎ or 8┃

┃┃

┃ is pressed the frequency will change with 0,05 MHz.

4. AUTOMATIC MEMORY STORING & PROGRAM SCANNING

- Automatic memory storing

Press AMS button (4) for 2 seconds, the radio searches the signal strength until one cycle search is finished.

And then the 6 strongest stations are stored into the corresponding preset number button.

- Program scanning

Press AMS button (4) shortly to preview all the preset stations.

5. MANUAL STORING A STATION

To receive a station and press one of the preset button(11/12/13/14/15/16) for several seconds, current station is

stored into the number button.

6. ANS (Announcement Name Station) OPERATION

- Setting AF mode

Long press AF button (20) to switch off or on AF mode.

Whenever AF is switch on, symbol “AF” appears on the display.

Program name is displayed on receiving a ANS station.

“AF” starts blinking if the broadcasting signal getting worse. And when the signal is too bad due a frequency

change. AF will automatically switch to the new frequency.

- Regional Program Operation

Press DISP/0 button (3) for several seconds to switch on or off region mode.

Some broadcasting stations change their program from normal broadcasting to regional broadcasting for a

certain time period. When region is on, the current listening program remains unchanged. When region is off, it

allows the reception moves to the regional station.

- Using PTY to Select Program

PTY button (20) 1 time.then press preset button(12/13/14/15/16/17). You can select the program type as below:

1# button: NEWS/AFFAIR/INFORM

2# button: EDUCATIO/DRAMA/SPORT

3# button: VARIED/CULTURE/SCIENCE

4# button: ECONOMY/CHILD PR/WEATHER

5# button: PHONE IN/SOCIAL/RELIGION

6# button: TRAVEL/LEISURE/DOCUMENT

PTY button (20) 2 time.then press preset button(12/13/14/15/16/17). You can select the program type as below:

1# button: ROCK MUS/POP MUSI

2# button: LIGHT MU/EASY MUS

3# button: OTHER MU/CLASSICS

4# button: COUNTRY/JAZZ MUS

5# button: NATIONAL/OLDIES

6# button: FOLK MUS

- Listening to Traffic Announcement

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lenco CS-322 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info