534853
5
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
UK-4
DAB/DAB+ manual tune
1. To select manual tune, press the SELECT/FM MONO/ST. button on the unit (or remote control) to enter into the
Manual tune” mode.
2. Press the SKIP/TUNE SEARCH (UP or DOWN) button to scroll through the DAB/DAB+ channels, the display will
show “5A to 13F” and their associated frequencies.
3. W hen your desired frequency appears in the display, press the SELECT/FM MONO/ST. button to confirm. The
name of the station group (ensemble/multiplex) will be displayed.
4. Press the STOP/MENU/INFO button o see what stations are present on the found ensemble/multiplex.
Secondary Services
On some occasions you will see a “>” symbol appeared after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra services that relate to the
primary station. E.g. a sports station may want to add extra commentaries. The secondary services are inserted
directly after the primary station. To select the secondary station, press the SELECT/FM MONO/ST. button on the
remote control when the “>” appears in the display.
FM mode
1. To select FM, press the DAB/FM/AUX button on the unit (or remote control), the display will show FM and the
frequency.
2. To activate frequency auto search, press and hold the SKIP/TUNE SEARCH (UP or DOWN) or PLAY/PAUSE/SCAN
/ENTER button on the unit (or remote control) until it starts to scan down or up the frequency band; it will stop
automatically once a station has been found.
3. You can also press the SKIP/TUNE SEARCH(UP or DOWN) button on the unit (or remote control) to select your
desired frequency.
4. Press the SELECT/FM MONO/ST. button on the unit (or remote control) to toggle select between the FM “STEREO
and “MONO” reception.
STORING AND RECALLING STORED PRESET STATIONS
In either DAB or FM mode, you can store up to 30 stations to the favourite presets; this will enable you to get direct
access to your favourite stations.
1. To store a preset, first tune to your desired station, then press and hold the iPod/ID3/MEM/C-ADJ. button on the
remote control, the display will show frequency and the “#” fiash.
2. Press the SKIP/TUNE SEARCH ( UP or DOWN) button on the remote control until the display will show
“ Preset Empty # ” and the “#” fiash. to select your desired station preset number, then press the
button on the remote control to confirm your selection; the display will show “Preset # stored” in DAB/FM mode.
3. To recall a preset station, press the button once and then press the SKIP/TUNE SEARCH
(UP or DOWN) button to select the stations that you have stored, then press the button on
the remote control to confirm your selection.
Note: 1. The stored stations will be saved into its memory and power off will not erase it. Storing a new
station into a preset location will erase the previously stored station in that location.
2
t
ID3/iPod/MEM/C-ADJ.
ID3/iPod/MEM/C-ADJ.
ID3/iPod/MEM/C-ADJ.
. During the unit in STANDBY mode, press and hold the STOP/MENU/INFO button to erase all preset
memory.
In FM mode:
DISPLAY MODES
Every time you press the STOP/MENU/INFO button, the display will cycle through the following display modes:
In DAB/DAB+ mode:
Frequency
Signal strength
Auto(Mono/Stereo)
Auto(Mono) Frequency
The frequency of the present station will be displayed.
FM FM
Signal strength
The display will show a slide bar to indicate the signal
strength, the stronger the signal, the longer the bar will
be from left to right.
Time and date
Programme type
The time and date will be automatically updated by the
This describes the style of the programme that is being
broadcasted information; there is no need to set the
broadcast. If the information is not available, the display
clock manually. In the unlikely event that no clock
will show “<Programme Type>.
information is received, the display will show
<Time/Date>.
Audio bit rate
The display will show the digital audio bit rate being
received.
Stereo and Mono.
Ensemble/Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations
that are bundled and transmitted together in a single
frequency. There are national and local multiplexes,
local ones contain stations that are specific to that area.
DLS
DLS stands for Dynamic Label Segment which is a
scrolling message that the broadcaster may include in
their transmissions. The message usually includes
information such as programme details …etc.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Lenco MCI-220 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info